Owner reviews for clutch kit

I ordered one from RockAuto for $370. This came in today, all logos are in the correct place, however they sanded off the Honda logo. Super excited to be clutch buzz free for half the price!

Let me know...main reason I went with Sachs was stock like driveability with no chatter and less chance of crank walk compared to other set ups with SMF and high torque pressure plates

I'm running this with my is38 and it's been great over the last 10k miles since I installed it. I used a brand new dmf as well.

I have a 2010 3.8 and replaced the clutch with a Valeo HD kit, including labor at a 3rd party shop it was around $1400.

I know most of the posts here are showroom floor cars with a ots tune, not a ton of legit builders on these older cars, but i thought I'd share my experience with my B7 RS4 LUK rep set clutch. I put in a performance clutch on a B5 1.8t about 5-6 years ago after a build I did pushing around 450, immediately slipped on the "performance" clutch. couldn't hold higher load gears. Ended up swapping in a 240mm ECS RA4 single mass lightweight flywheel with a B7 RS4 clutch and Pressure plate. (Just have to drill the pilot holes on the pp out to 10mm and shim the flywheel out ~2mm or so for a EPIC low dollar performance clutch.) I've been thrashing this with everything from a much larger custom hybrid k04 @30 psi, an EFR 6758 turbo, A custom hybrid Holset hx35/hx40 pro (BIG turbski) bigger than my head and im a huge dude. Then a handful of small/medium frame (gt 2871r) and some pretty large T3/T4 hybrids with IE Tuscany rods on a 1.8t trying to find the sweet spot between performance and drive ability (read.. lag) this clutch has been absolutely beat. Absolutely. 2 step launches for years, clutch kicks, tons of dig launches and drags that cost me cracked rear subframes or destroyed transmissions (it's a transmission boneyard in my shed lol) I recently sheared my timing belt pulley clean off.. too much sauce, and pulled this motor again to throw a new head, turbo and transmission in. It's my stupid fun car. Was surprised to find this clutch disk in such good condition. TONS of life left in it. Cost like 150 bucks off rock auto. LUK repset B7 Rs4 clutch and pressure plate. For anyone looking to push some serious power, this is a SOLID option for the budget minded individual. I'm throwing one on my B5 S4 as well after seeing this. Was going to go big because it's a stg 3 at 27 psi and the stock clutch can't handle it, but after seeing this. And having made more power than that I am sold. Great upgrade if you need to replace your clutch. It is a 240mm clutch so make sure it fits or you'll need to upgrade your flywheel too. But dang.. I'm tickled pink

My go to is exedy stage 1 organic clutch kit. It can hold like 400 hp before it gives up and it's a good daily driving clutch. Also exedy is the oem for many cars the their oem labeled stuff is the same as \"Honda\" oem

I got it and am loving it. feels great

I would suggest the Valeo HD kit which feels similar to stock, but holds a lot more power, and get the stainless clutch line added it. I have the BK1 3.8 and replaced mine with the Valeo HD kit and flywheel from the BK2 and I like it. My original clutch also lasted until 242k miles because I don't drive it like an idiot...and it was actually the slave cylinder that went out. The clutch disc had a good bit of life left in it.

I have the Sachs Xtend kit on my dual pulley S5 w/ss clutch line and it holds power well. My problem is that it slips on digs if I don’t quick shift into second.

I ran the Performance kit and by 4 months in it was slipping badly. This is after a break in period of 500mi (city driving) before running any significant power through it. I don't beat on the clutch by launching it or dropping it. I kept the OEM flywheel with this kit. It's also very heavy, and you definitely feel it in the pedal. Overall I wasn't satisfied with this kit.