Reviews of Sachs clutch kit

I recently had my 2011 Smart Fortwo 451 (1.0 turbo) serviced to replace the clutch and actuator, and I wanted to share my experience. What We Replaced: -Clutch kit (Sachs, OEM) -Clutch actuator (OEM). The old clutch was clearly worn, and the release bearing was almost failing. However, the dual-mass flywheel seemed fine, with no excessive play or noise. After installing everything, the mechanic performed the clutch re-adaptation with a scanner. I finally got my Smart Fortwo 451 (1.0 turbo) back on Friday after replacing the clutch and actuator, and I can definitely feel a big difference. Here are a few things I’ve noticed: 1. Gear changes feel slightly smoother. 2. Weird air sound when accelerating in first gear. 3. The car seems eager to shift but sometimes unnecessarily downshifts.

I can say I still keep an original 1990 G60 Corrado Mannesman Sachs clutch kit around to compare to newer ZF Sachs clutch kits. The older ones are thicker metal for the pressure plate shell and its friction surface, the newer ZF Sachs is thinner metal, but I use them because we have no time machine to get NOS 1990s parts.

Just did the clutch on my old 3.0, rockauto had a Sachs clutch kit. Works well, is a pretty reputable OEM brand.

I’m in the middle of doing mine on my JK myself. I forget my mileage, under 100k. I wheel a little bit and plow my own driveway, so that may have contributed.

Like another commenter said, putting a new clutch in is easy. Getting access to it is a decently painful, though.

I got a Sachs clutch kit from RockAuto for about $200, the OEM one I pulled out said Sachs too, so I had some peace of mind that I’m at or near OEM quality for half the price (MOPAR parts were $500 from RockAuto). Kit comes with clutch, pressure plate, throw out bearing, and pilot bearing.

Put in a Sachs Xtend kit. I’m currently at 173k on my 13’ s5

Sachs VR6 Clutch Kit

176k, Porsche 944. Throwout bearing went before the rubber center did, honestly the clutch was still fine. New Sachs kit in it now. That transaxle clutch job is a doozy.

Sachs clutch kit is the way to go. I've installed several in Z3's, and every one of them had a great feel. The kit comes with everything you'll need besides tools, although I'd replace the clutch fork pivot pin while in there.

I got the Sachs clutch kit with a ecs light weight flywheel I think it\u2019s a stage 1 kit super smooth so far kinda pricey but I\u2019ve dealt with cheap and I didn\u2019t like it.

Just stick to OEM. The OEM clutch is good for 500+ horsepower and you will be making no where near that. Its only $230 for the sachs clutch kit on FCP Euro