Volkswagen Jetta parts reviews

867
Parts
25
Castrol Engine oil
reynolds9000
  • Engine noise:
Rating 4.5

I did notice lifter noise with the 5w-40 so decided to go with Castrol Syntec 10w-40 and it made quite a bit of difference in quieting down the lifters. I use a Mann filter. After i get the engine flushed on my VR swap using ****ty conventional oil, i'm going to run Castrol Syntec 10w-40 in it as well. Lots of people recommend 5w-40 or 0w-40 for the VR but i've found 10w-40 works well and my oil temps seldom exceed 208*.

Pros: quieted down lifters, works well
Part number: SYNTEC 10W-40
Comment
Is this review helpful?
source
EBC Brake pads

Just today I changed the rear brake pads and rotors on my 2004 Jetta GLI 1.8t. I got some new Zimmerman rotors and EBC Red Stuff pads on now, and obviously that fixed the grinding.

Pros: fixed the grinding
Comment
Is this review helpful?
source
OEM Volkswagen Antifreeze
jni3
  • Colored puddles:
Rating 4.0

I got the light this morning on the wife's JSW. So I checked out the situation. Sure enough seriously low coolant, like well below minimum fill line. Only 7000 miles. Took it to the dealership to have it topped off.

Cons: seriously low coolant
Mileage: 7000 km
Comment
Is this review helpful?
source
AMSOIL Engine oil

I used Amsoil 0W-30 Severe service oil in my Jetta 1.8T for the first 120k miles or so. No problems, mostly 5-7k oil changes except when I was commuting from Ct to Boston.

Pros: no problems, reliable for 120k miles
Mileage: 193121 km
Comment
Is this review helpful?
source
LIQUI MOLY Engine oil
thygreyt
  • Engine noise:
Rating 5.0

I agree with nickbeezy... Liqui moly is qualit oil... Its funny, the way i see it: it delivers better quality than expected... If you use the oil in addition to some of their additives you will notice impressive results. These results include a quieter engine, better mpg, better long term reliability, less oil burned, etc.

Pros: quieter engine, better mpg
Comment
Is this review helpful?
source
BERU Ignition coil

I had my old OE coilpack off, replaced with the new BERU unit. I had everything put back together, started her up, and she was running okay, but still far from perfect.

Pros: running much smoother
Cons: still far from perfect
Comment
Is this review helpful?
source
NGK Spark plug

I went out bought the NGK plugs and installed them moments ago. Reset the codes and started the engine. Within 1 minute I had the CEL and the P0351 - P0354 codes.

Pros: installed new plugs
Cons: CEL, error codes
Comment
Is this review helpful?
source
1 ... 54 55 56 57 58 59 60 61 62 ... 87

Write your review

Help others - share your experience with this part.

Loading...