Volkswagen parts reviews

I then bought one that was made of aluminum and had a metal impeller (Dorman brand I believe) I never had an issue with it after that.

Well I began taking apart the car and removing the starter and found that a part of it was bent. I'm not sure if that's the solenoid or what it's called but I'm pretty sure it's the reason the car wouldn't start.

My 2008 3.6 Passat had been throwing CELs for fuel pressure off and on for a while. Then last week the N276 (Fuel Pressure Regulator valve in the High Pressure Fuel Pump) revealed itself as the source of the problem by failing completely. I got tons of misfires and surging on cold starts since the pressure in the fuel rail wasn't being regulated and maintained properly. Otherwise the job was pretty straightforward. I got a Hitachi HPP0014 from RockAuto as a replacement HPFP (original was a Hitachi as well). The plug for the N276 had a little gas in it, confirming that the N276 had failed internally at 15 years/125,000mi.

I use brembo pads from ecstuning.com , dont buy parts on amazon or from china when you have a much better source available. I have ECS's own 2 piece rotors on front and brembo rotors on rear, my braking is really powerful and has lasted a long time despite what people say about ceramic pads and drilled/slotted rotors

Bought some Akebono Ultra pads and wheels look great all the time! Didn't notice any drop off in performance

When I replaced the brakes on my 2016 Performance Package GTI, I took my local shop's recommendations on an "upgraded" pad for the fronts. The next month, I experienced so much squeaking when I applied the brakes that I went back to the shop and asked them to put stock pads back on. I've been happy every since. I would recommend stock pads from VW.

Oil Changes are done every 7,500km (VW calls for 15,000km). Always done with Fuchs/Liqui Moly/Motul full synthetic oil (5W-40) and MANN filter.

Have Hawk Talon rear rotors. A bit more show than stopping grip . But they are decent for the semi aggressive lol

In the days of my Mk IIIs I used Rain-X washer fluid. It made the lower seal below the windshield turn into soft crumbly gum. At least I've always assumed it was the Rain-X stuff. I haven't used it since. It worked pretty well as Rain-X with no rubbing, though. I was impressed until it came apart. Fortunately the seal had some mysterious purpose, as it was outside and below the windshield and the loss of it didn't cause water leaks.

I also had the coolant replaced. I asked for the OEM stuff, which I guess is pink (?). They said mine was pretty much black !