Mazda 3 parts reviews

0w20 Mobil one synthetic and Mobil one filter since 50,000 km to now 205,000km on my 2014 mazda3. Engine runs great.

Eneos 5w-20 in my 2008 2.3 liter Mazda3. It's a Japanese-branded synthetic oil that you can get from Napa Auto. I've found that with Eneos, my Mz3 stops consuming any oil (in both my 2007 and 2008 2.3's).

I've recently put the Michelin Costco wipers on and they're great! These cost me CAD $10 per front blade.

I'll be putting on the General Altimax Arctics that have gone on the wife's 3 for the last few years. They're unkillable. Too bad the car is still mediocre in the snow due to the light weight over the drive wheels and the traction (out of) control. The Frontier will need a decent set of A/T's to get through the winter. Been thinking the Cooper Discoverer AT/3. I've gotten almost 50k out of the stock tires, not bad IMO. The Mini will have to soldier on with the crappy all seasons that are on it right now. It will not likely see much, if any, snow.

Now on the shocks: Before I cut the bump stops, the car would frequently bottom out on the rears, so they weren't really able to do any work. Afterwards though, she smooth. I'll still feel bumps and holes through the chassis from the springs and hear the tires going over cracks, but I don't really feel the cracks quite as much. Train tracks that used to rock the wheels are more floaty and smooth now.

Although this is exact replacent, mazda OE still uses Mazda branded GF-5 which is exactly the same oil but branded Mazda....

Love these high molly low viscosity oils. Absolutely the best out there

That's the wrong oil. You want the Idemitsu eco gold medalist advanced moly 0w-20, which is basically the same as Mazda oil(Idemitsu makes the mazda oil).

I have the V2 Concept2 all-seasons on my Mazda3 and the Ventus V12 Evo K120 summers on my Mustang. You really get what you pay for. The Concept2's have good ride and noise, but the wet performance is abysmal. The Ventus V12s are a decent performance tire but they greatly lack the dry grip of Pirelli P Zeros or Michelins.

I hated them on the base Turbo hatchback I had previously. Grip was awful in the rain once temperatures dropped.

Be careful with the Exedy flywheel. The dowel pin could fall out and cause lots of damage. After it happened to me, I just removed the dowel pins after I bolted the clutch pressure plate down since they are only used to align it when you install the pressure plate. I didn't think the extra pedal effort of the Exedy stage 1 clutch was worth it and went back to OEM. Speaking of, the bearings that come with the Exedy clutch kits are now made in China and don't last that long, even though the other parts are made in Japan. I went OEM with the bearings (clutch release/throw out and pilot) this time around after I had to prematurely replace my clutch because of the bearings.