Brake pads EBC or OEM Chevrolet

I put on EBC redstuff and they work well.

But the EBC SR11 and SR21 pads have been a game changer for us with regard to wear rate. We run these on our endurance race car and so far they have blown everything else we have tried out of the water. We just started using these so my experience is limited. But we just ran an 8 hour enduro at the ridge and used 1.5mm of front brake pad. This length of enduro at this track would usually consume an entire set of front pads down to damn near the backing plates. This is on a fox body mustang that’s 2600lbs and makes 330whp.

EBC blue on stock rotors, and stock suspension for 2 seasons so far... The pads are done, but I think I'll be getting the EBC blue again

I use EBC red stuff Front and rear. Better than OE performance, with less brake dust.

I upgraded to ebh yellows from stock, they are affordable, huge braking improvement in pedal feel, if your in a cold climate id avoid ceramics.

I changed over to ebc yellows for a track day and still have them on 1.5 years later.. LOTS of brake dust but the stopping power is night and day.

Raybestos rotors and ebc redstuff pads, a bit aggressive but you get used to em

EBC yellow is really more of a daily driver pad than a track pad. I have them on my Golf R and they faded easily on the track. Great on the street though

My breaks were squeaking with less than 5000 miles. Bad and embarrassing squeaking.

I have about 1k miles on my 25 Equinox EV and the brakes have started doing this. It’s horrendous backing out of my driveway and at drive thru’s. Sounds like I’m driving an old beat up car that I haven’t maintained.