Brake discs Brembo or ATE

I know nobody asked about parts, but I’ve been happy with Brembo and Zimmerman coated rotors, and ATE ceramic pads. They aren’t grabby like the stock setup but don’t seem any less strong. Smoother and easier to modulate.

I just changed my front rotors and pads recently. I bought Brembo 26300VA000 rotors with Hawk HB616Z.607 pads. In total, I spent $450.89 USD for the fronts alone. It was simple and straightforward to change.

I have a 2016 300h and was actually doing the rotors just today. Idk if the 350 and 300h share braking components but if they do be aware that the rear rotors may need their parking brake adjusted to even be able to get the rotors off. That little rubber grommet has to be at the 6:00 position and you have to inch a gear down to adjust it.

Then, I bought ATE rotors and kept OE pads. ATE resolved problems; there was no vibrating for 22,000 miles so far!

I went with: Brembo rotors all around 288mm front and 232mm rear Tyrol Sport Front Brake Stiffening kit DFC track pads(similar to Hawk HP) I still need to do SS lines and a fluid change, but my car stops very well for street driving. I will be swapping my pads for Hawk Performance Ceramic's though only due to brake dust.

I got ate powerdiscs and they are pretty good! I got them as a set with ate pads. I wish they had a bit more bite but maybe that’s due to being 296mm, maybe bigger brakes are needed next time

Just bought some brembo rotors and pads for the front. Oil filter and a rear windscreen wiper blade for $289 AUD.

Went with Brembo UV coated rotors so they won't get rusty. Then, for pads, I went with EBC Reds on the front and Wagner ceramic on the rears. Stopping power is just like OEM pads without the awful awful awful brown brake dust. Night and day difference with the brake dust. Wheels look great for a longer time.

I really hate to say this but you paid way too much for those front brake discs. But I don't understand why these pins were so stuck, mine were rusted just like yours but a couple of bangs with a hammer and steel pin and they just flew out.

And those Brembos and drilled rotors that just...rust, are so expensive...