Owner reviews for brake pads

So i swapped out the OEM pads for some EBC sintered HH pads on my 22' Monster and I have to say the difference is night and day. Initially swapped the pads to try and fix the annoying brake shudder issue i had when slow braking to come to a stop (at a traffic light for example). Also I hated how the OEM pads felt. They were kind of soft and not very good. I ride pretty aggressively and I had a aprilia 660 before which had the same calipers (different master cyl) and the brakes felt way better and more direct because it didnt have such shitty OEM pads. I went for a quick ride after changing the pads and now the brakes feel waaay better and more direct. Paid like 60 bucks for both sides and also cleaned out the pistons and everything while i was at it. Can only recommend it to any 937 owner, because the OEM brake setup with the M32 calipers would be really good but the shitty pads are kind of ruining everything. I cant tell yet tho if the brake shudder issue i had is fully gone. During the test ride i felt like sometimes the front ent wasnt pulsating/grabbing anymore but sometimes it was still there but i hink it takes some time for the new pads to "brake off" all the uneven deposit from the stock pads. I heard that its a problem that the OEM pads also dont really "clean" the rotor well enough so thats why i thought id give the HH a try in the first place. Will go for another ride tomorrow and bed them in a bit more and see if it gets better but im pretty confident.

Got Redstuff for street use only. Everything is fine.

Falken P# 28537258 Brake Pads! Porterfield R4-S Teflon brake hoses! Goodridge?

Stock pads are Akebono ACT1124 and ACT1539. ASP series is a decent upgrade without sacrificing on dust and noise though.

I‘ve got a 2019 F Sport. Same color as yours. 105k miles. Still looks and drives amazing. Have had to replace nothing but filters, tires, rotors and brake pads.

Last set of pads were yellowstuff, they had a nasty bite when low speed braking and whined terribly. Switched to greenstuff, i like them.

Nice middle ground in brake performance, no whine, no low speed bite, no oem shimmy.

Bought reds, burned through them, bought blues, i like them better. A touch more grabby at slow speeds, and slightly more dust, but they held up at an HPDE no problem. The reds did not.

I have these exact pads. HUGE improvement.

Those look to be EBC "greenstuff" brake pads. "For spirited street use on lighter sports sedans and hot hatches, Greenstuff 2000 series is a perfect choice." They are made more for performance than driveability, they aee not really meant for your average daily driver. They are not bad pads, but they are intended more for the weekend racer. The pads will be noisy and harder on the rotors than regular pads. EBC also offers a red pad that is even more aggressive and intended strictly for track use.

I ran Hawk DTC60's for one event. They dust like crazy which isn't the end of the world by itself, but if the dust touches any moisture at all (like the rainy track day) it mixes into what I can only describe as ferrous concrete. So not only is the dust-crete impossible to remove by any normal means, it then rusts like crazy, turning whatever wheels you have into a runny orange mess. I tried multiple different wheel cleaners, multiple brushes, soaking, anything and nothing could get it off. I had to use scotch brite and scuff the hell out of the wheels to get it off. Fortunately I run cheap TRM wheels and it's a track-only car otherwise I would have been livid.