Reviews of MEYLE parts For Business

no complaints on the couple meyle kits I have installed. seem like legit parts.

I've had Meyle Corrado G60 11.0" 4-bolt rotors on my 97 Jetta GT for two years, and they are barely wearing (plating is gone off the friction surface of course, but holding up well over the rest of the rotors).

Replace with Meyle HD strut mounts (about $11 each)

I'm kinda partial to Meyle plated rotors. They're inexpensive, high quality, and appear to be wearing well on my 97 Jetta GT (Corrodo G60 11.0" front calipers and rotors).

If you use a standard VR6 strut mount, it will stretch over time, luckily Meyle has a HD version which addresses that issue.

For those of you replacing your steering rack with a Meyle Brand manual steering rack you might want to take note. If you follow the bentley procedure for centering the rack and then setting the length of your tie rods it will not work. The passenger side measurement is off.

I have narrowed the noise to the steering rack itself. It is a Meyle rack. 171419063. It has been on about a year and a half. I'll try tightening the pinion torque a smidgen tomorrow to try to solve the problem. I don't notice any play in it.

My Meyle tie rod ends lasted less than a year before both started making noises, and had torn boots.

OK, so I have heat now. When I pulled the core to check and see if there were any plugs in the lines I found a major defect in the core. deep inside one of the fittings you could see that there was no coolant passage. The thing was molded shut! So I drilled the fitting out and blew out the shavings from the opposite side, slapped it back in the truck and had heat right away.

As much as I dislike the quality of the current Meyle racks, I don't think the rack could not be the cause of that because I compared an original rack rod to a new Meyle one and they are the same length.