Best Brake caliper for Volkswagen Corrado

Caliper kits are easy to find for your Lucas calipers, just look for a TRW kit.

I’ve rebuilt the front calipers, upgraded the rears to MK4 callipers, new pads and rotors, new proportioning valve, TT stainless brake lines.

I have a set of NOS Girling 60 from Autotech garage sale on the g60 right now. Have been running them for over 7 years. Better pedal feel over the G54's and no changes need to be made to the existing Corrado (g60 or VR) mc.

Maybe take a look at the Girling 60 calipers and the 11.2 inch rotors from a 'rado g60. Nice large dual piston calipers and 11.2 inch rotors on a mk2 is just about overkill.

I have the Seat Ibiza Cupra R 4 pot Brembos for a 4 lug 12" rotors I'm running Brock B2's 16x7.5" with a 15mm FK spacer.

Best brake mod for the buck, with this car. Did it on both my VR6 and G60! Tremendously improved brake feel, reduced fade, and decreased stopping distance.

Put on G60's and stopping questioning yourself. Now that mine are finally broken-in the pedal is like a hair trigger that kicks off the ABS at highway speeds

I was actually using the C carriers and 11rotors with my G/J calipers for a few months. I was waiting for my SS lines and pads, I didn't need to bleed the brakes.

Replacing my Wilwoods b/c I dont race (yet) and don't want to maintain them every 10k miles.

The Girling60s weigh an absolute ton, but yield no performance advantage over a G60 setup. IMHO better street config is: - 22mm master cyl. Note that the later cabby MC is not 22mm. However the brake booster can accept one. - Corrado G60-compatible quality 11\" discs - Corrado G60 calipers and carriers - Good pads. I run Hawk HPS myself but there are several good choices - An appropriate set of adapters Personally I have rear discs and adjustable brake bias. I found it necessary to tune the balance after installing bigger, bitey-er brakes, and a heavier engine.