Shock absorbers Bilstein or Dobinsons

Qmulus that is a great tip for removing that bolt. When I put my Golf R control arms and Audi solid rear bushings on our 2013 tiguan I lowered the sub frame because I was installing the dead set kit at the same time. Along with HD Bilstein shocks.

Best thing I did was put Bilstein 5100's on it in place of the Ranchos.

As was mentioned already, the Bilstein B4 is available for the front and rear of the Atlas. I have a full set of B4s on my mkV Jetta and they are fantastic. Quite firm but still comfortable. They rebound once and the party's over, unlike the Atlas which pogos down the road.

Bilstein claims around 10% stiffer dampening and rebound over OEM. I've had both B6 and B4's on my Passat, and the B4's was something I preferred more.

However if you're willing to spend upwards of $300 per shock bilstein b6 shocks go great with heavy loads.

Bilsteins would be a better option to choose from as they have direct replacement shock valving that offers a better ride then the stock rancho's but its all personal preference. Bilsteins while stiffer then stock some find too stiff (they're main goal you can say is handling)

Bilsteins have never failed to deliver for me. They spend so much on R&D and valving test and tune that they just perform so much better.

Bilstein 5100 is what I replaced them with. The ride is a lot better.

I did find the b6 to be on the stiffer side. Not full on race car stuff, but definitely "sporty stiff."

They absorb impacts really well, but you're still gonna feel everything.

I installed Bilstein B16 DCC shocks/springs. Frankly I hate them. They are not tuned to the chassis well so makes the car pitch over bumps and creak/groan badly