Engine oil Castrol or VALVOLINE

I’ve been running it in my 1992 Nissan D21 truck with over 200k for the past two oil changes and it’s gotten rid of a lifter tick it had for the past 20k miles. Runs a bit quieter too. Pretty good oil.

I've been using it for the past 3 oil intervals. I've seen a few oil analysis on the stuff with a few that came from FA24 engines and its wear protection is just as good or better than any GF6 oil out there. Its supposed to also meet the New GF7 oil specification as well that just came out in March.

I’ve had great luck with “Valvoline Restore and Protect” I have a Sportage with the same 2.4L, it burns 4-6 oz. every 3,000 miles. Used to burn 1 qt every 500 miles.

5W40 Castrol

So I went from valvoline max life full synthetic 10w-30 in my k1500 92 gmc sierra sle with the 350 and tow package, flat tapped cam truck, to valvoline restore and protect 5w-30. I was having oil pressure issues, only 188,xxx miles. After switching to R&P, 1500 miles into the oil change, I consistently have above 30psi oil pressure.

I use Castrol Edge. It's cheap and good. I drive a lot and I change oil every 3k miles so 5qt for $25 just fits my life better.

Ang nagamit ko palang na brands ay toyota, shell, at valvoline. Walang problema sa 3 na yan. Pero last kong gamit ay valvoline eto yung sakto sa specs sa manual. Mas mararamdaman mo na smooth yung sa makina.

B46 which is essentially a B48 engine. 105000km. Running Castrol Euro Car 5W30 in the summer and 0W30 winter. Live in Canada so the ambient temp can range from -30C to +35C.

I used Castrol oil and was not satisfied but this oil till date has helped alittle with consumption as well.

Castrol edge is junk.