Brake pads STOPTECH or Hawk Performance

Stoptech Street Performance pads are a better compound. My wife had them on her old WRX and they were fine for her use. She didn't experience any noise, they were lower dust than the HPS, and were quicker to bite honestly.

I had the stoptech then switched over to Hawk HP Plus - best decision I've made. They're not exactly quiet but tolerable (in my opinion) - they bite awesomely though.

I would recommend Hawk HPS pads. They bite instantly, so they could be a little noisy if you don't grease the backs. They aren't great on dust, but you will always have a lot of brake dust due to the size of the brakes. The performance is probably the best available for non race applications. I have never experienced brake fade, but I do have a heavily modified brake system.

i decide to swap for BBK Discs front mercedes GL 350mm drilled Textar's i pads Hawk Performance 5.0 rear discs 310mm drilled Textar i pads Hawk performance 5.0

I have scirocco 10.1's up front and 8(?) discs out back with mk4 calipers. All four have Hawk HPS pads I believe. They're more than enough stopping power, OEM, and very affordable if you buy them on vortex, ebay, or a junkyard.

So far the above combination is great, brakes are stronger than stock, take longer to fade, and don't make any noise. But the dust...it's horrible. I'm finding myself cleaning my wheels 1-2 times a week now :what:.

R32 front brakes with hawk pads (installed at 25k)

Hawk HPS are outstanding, good bite with very linear feel and low dust

Those were my last pads. The bite is totally different from stock... but in the winter, the first couple of stops are down right scary until the pads get some heat in them. I'm braking down some steep inclines... that's why I got rid of them half way through its life--- hoping the Akebonos will be better..

Even though they have the word street in the name, they are very prone to judder and deposit build up and are not good under gentle street usage.