Brake pads Project Mu or OEM Audi

The street type are great all rounders, reasonable bite and minimal drop off. Pretty low dust and noise, and wear was terrific. The set I had lasted longer than the oem pads I had before them. The performance of the track orientated pads is absolutely insane. The initial bite is like no other pad I've ever had. It drops off a tad but still great stopping power. However dust and noise are pretty terrible.

I run the Project Mu HC+ and DBA4000 rotors on a FK8 CTR that is also daily driven. over all very happy works ok when cold but 1 or 2 stops and its up to temp and has great bite. and really only minor pad sequel when stone cold.

The best solution I have found is to use slotted rotors--cryo treatment typically gets me 10K more miles before hard spots develop and I get a pedal vibration--and an aggressive pad without any ceramics. My solution is to use the best quality slotted rotor I can find, cryo treatment preferred, and use either a Wilwood BP-10/20 pad or a Project Mu NS brake pad. I found those two pads were aggressive enough to have great stopping power and would wear out the rotor at the same rate the pad wore down.

I personally use Project Mu HC+800 for their fantastic cold bite and high temp resistance.

My car has smaller brakes than yours, so I was able to downsize to a 245 45R17 for winter use from the 255 35R19 summers and the car is so much smoother but still can handle just as good.

I managed to get my hand on a set of MK1 Audi TT front and rear brakes for a steal, also round the corner to my work which was even better. This takes my front brakes from 288mm up to 312mm and takes my rear brakes from 232mm solid discs to 256mm vented discs.

I had my S3 in last Friday and the dealership managed to fix my tick/click. I took a video of the noise before taking it in for service but it didn't turn out as well as nikhsub1's; however, the noise was almost identical to nikhsub1's but mine only happened when turning to the right. I would hazard a guess that it may be the same issue some are experiencing with the R. I didn't get the chance to talk to the technician directly but the service writer described the issue as a loose pin or tab on the brakes that was making contact with the rotor.

I saw a review of the GTI with the PP and the reviewer said the brakes on the PP are the same brakes used on the Audi S3.

I found a nominal improvement in braking power and feel with the 12.3". But as NOVAdub stated, the biggest impact was on repeatability.

If you want an honest oppinion, do not run these brakes, just get yourself a corrado set up w/ good pads and you will be more than happy.