Brake pads Brembo or Ferodo

Currently running Ferodo pads which I prefer to the Mintex Redbox pads.

What I did notice is that the brakes performed better when doing repeated stops which is related to their heat dissispation.

The most economical upgrade for street use is just beefy pads. Try Ferodo DS2500 on the front axle with your OEM 11.3" rotors combined with Hawk HPS on the rears.

I fitted it to my Rallye. Braking power was great, but with the ABS system it losed feel. I removend the ABS and went on a conventional system and is wonderful

I've driven a Cupra R and can attest to their great stopping ability. IMO not as good as the AP's but for the price difference, they are worth it.

i have it installed on my corrado g60 and it is a great upgrade just bolted straight on (you do have to be carefull that your wheelsize is ok, et value has to be low enough) Overhere in Belgium and the Netherlands almost every corrado swapped to the cupra brakes (I know my self at least 20 people who have them and are very very very happy with them)

Ive been running ferodo 2500s and motul rbf600 fluid and have never had them fade.

I liked the ferodo street pad a lot. I got mine used from potterman when I bought the brakes from his one lap car. They had great initial bite and did farely well on track. They would start to get overworked towards the end of a session but they are street pads. They dust a lot just like the 2500s.

I'm running the same setup as you (Ferodo DS2500/Hawk HPS with ATE Super Blue) and also notice some mild fade after 6-8 laps. I also get a mushy pedal which persists after the brakes completely cool, meaning I'm probably getting some fluid boiling and need to bleed them out.

just swapped out my original brake pads and rotors for some oem rotors with the brembo aftermarket pads hoping to avoid the dust that the original trw pads creates. all went well with install, everything seemed to fit nicely, but after about 10 miles the pads started jumping up and down in the carrier any time id hit a bump in the road. ive seen the threads talking about this issue with certain aftermarket companies, but figured id put it out there that brembo is another one that seems to have made their pads just a tiny bit shorter than original giving it enough room to slide up and down. side to side is fine, but the noise is unbearable for what it is. threw my oe pads back on and will be getting a new set of vw pads in the am. cant stand the dust but its wayyyy better than the car sounding like it did with those pads. these companies need to include shims or something.