Brake pads Brembo or Ferodo

front - 9.4in vented rotors ferodo ds2500 fastroad pads rear - swapped to discs mk4 calipers ferodo ds2500 fastroad pads

overhauled the brakes(all 4 corners): -calipers(rebuild) -discs(brembo) -pads (ferodo ds2500)

The rear brake pads I use all the time are ferodo 2500, they are great for the track and don't make noise on the street.

It's a very noticeable difference when compared to the stock 10.1" (on my 99 4-door that is). You add a little bit more weight up front, but it's worth it since you get much better stopping power. I will never go back to the stock brakes, I love my G60 brakes

The rear brakes are a rotor and pad upgrade with the calipers matched to the front by Brembo in Brembo Blue.

I used Ferodo DS-2500 and Mintex Redbox on my 337, and that was my favorite brake setup of three VWs to date. Then there is my brother-in-law's 335i Sport My goal with the 337 was to delay ABS activation, as I thought that the rear was overbraked. I don't recall whether the new pad setup helped in that regard, but the DS-2500 improved the initial bite a lot.

I love me some blanks and Ferodo pads. But the pads aren't too budget friendly ($90 a set) and they've quite dirty, but the stopping power is awsome.

I got the upgrade, it's definitely noticeable from the stock 11.3 in the 1.8ts and vr6s - but really, if you want best stop for budget, just upgrade the rotors to slotted for heat dissapation and some good ferodo pads... but if you do upgrade, you'll notice difference in stopping - as well as your acceleration since you have more rotaional mass at that point...

Brake pads were replaced abt 2,000 miles ago, and the rotors; apparently can last till i have to replace the pads again.

I swapped out the rear pads on my 2017 Mk7 Golf R following the instructions for doing so with OBD Eleven Pro to a "t" and still wound up with a plethora of error codes. I installed new (Ferrodo) pads