Brake discs Brembo or MEYLE

About a year ago, I installed a complete Meyle control arm kit in my B7 A4 Avant . At the same time I installed a set of Meyle geomet coated rotors and Akebono ceramic pads on all 4 corners. The car still rides, handles and stops like new. The rotors still look new with no warping and no rust after a tough New England winter.

I'm running Corrado G60 11.0" front calipers and carriers, and MKIV alloy rear calipers on my 97 Jetta GT with Meyle plated rotors. The rotors are about four years old, and still look almost new. A few small rust dots are showing, but not the massive rust that you see on most two and older rotors, and virtually no wear of the friction surfaces.

Buy good quality rotors such as Zimmerman, Brembo OEM ( surprisingly affordable ) Wagner, Raybestos or Bendix. Stay away from cheap s**t like Powerslot or other Taiwanese made garbage.

I can certainly feel the difference between my brothers Brembo with slottted setup vs my boring yet effective Honda oem stuff.

I've had Meyle Corrado G60 11.0" 4-bolt rotors on my 97 Jetta GT for two years, and they are barely wearing (plating is gone off the friction surface of course, but holding up well over the rest of the rotors).

I'm kinda partial to Meyle plated rotors. They're inexpensive, high quality, and appear to be wearing well on my 97 Jetta GT (Corrodo G60 11.0" front calipers and rotors).

I'm running Brembo rotors right now. I haven't been using them long enough to know how they hold up, but they are very very smooth

I'm running the coated Meyle rotors and have been pleased with them over the last year. They appeared to be well made out of the box and fit well, especially for the price. The anticorrosive treatment is holding up well too.

I know my Brembos cracked like a Mofo. They are still kicking ass and unwarped though

The front rotors were in a box from Zimmerman and rear were from Brembo. Just about from the start the brakes slightly squealed. The noise gradually increased that nearly each time the brakes were stepped on they squealed. After about 2K miles the noise got to the point of being excessive. They squeal in the morning when cool when slowing from 20MPH or warm and hot when slowing from 45+MPH. The only way to make them silent is to slam on them hard, but the next time they will squeal as well. In addition to the noise, the rotors started developing rust on the hub sections.