Reviews of OEM Audi parts For Business

This is definitely a fix for those who complain about H&R springs.

I finally got around to installing a new thermostat/o-ring/housing and coolant reservoir/cap yesterday. When removing the thermostat, I noticed that the bottom bolt was VERY loose... I had done the thermostat without housing about a year ago now, had never leaked coolant before... My best guess is that I just didn't torque it enough and it slowly loosened, but only when cold (just a guess, but would help explain why no drips when car was running on ramps) and in small enough amounts that I did not notice a puddle on the ground.

I took the liberty of swapping my A4 brakes into S4 brakes, all for 600 dollars. The brakes should response much better, stronger, and use much less pedal force. Your brakes when the engine is off should be REALLY hard if properly bled.

Yea its a direct fit in the oem location. The only thing you need to do is cut the oem connectors off the oem IC hoses and then hose clam them to the S3 IC.

I had the alternator changed in one of my Phaetons. The overhead light was fluctuating when the engine was running. The problem was fixed when the tech replaced the alternator under warranty.

I have since upgraded to oem rs2 brake brackets with porsche 996 calipers and audi s8 rotors, everything was bolt on with good clearances.

It was everything I wanted and needed. Runs perfect and looks great. The only issue I have had with the car was a flickering headlight but Audi fixed it for me.

I would add the chain driven oil pump to the Con side. The internal chain is more susceptible to failure and has higher maintenance cost. these motors are notorious for the chain guilds wearing out clogging the oil pump pickup and starving the head, turbo and motor of oil pressure causing an expensive repair. ask anyone you know who owns one. My friend with a 1.8T Audi has had this happen twice in 2 years. another thing to consider is internal timing chain = higher maintenance cost.

Audis are fun to drive and own, when you're not installing new control arms, valve cover gaskets, tensioner gaskets, timing belts..... Audis suck to maintain.

Waterpump failure at 26k factory installed (plastic impeller, bearing)