Spark plug NGK or OEM Toyota

Currently using the NGK racing R7438-8 (NGK 4905)

Ruthenium HX 95125. Lots of good feedback on the forums, I’m using them out of the box gap and they’ve been great. About 5K miles so far

From literally every single objective comparison, the NGK ILKR9Q7G looks like be identical to the HKS M45XL except for price. NGK literally produces the plugs for HKS and NGK is likely the largest plug manufacture in the world with decades of reliable products to boot.

Mine are either ACDelco or NGK, cant remember which. Either way no complaints.

I went ahead and replaced all 4 coil packs and plugs as well as the PCV valve. Since I have to order parts, it seemed faster than checking the plugs and swapping coil packs, as well as good insurance, since the coil packs and PCV valve were (over)due for replacement anyway. It took about an hour without rushing. Took about a 30-minute test drive, highway and town, and the engine's running smoothly. Ran a scan when I got home, and no new fault codes, so I cleared them all out and the check engine light went out.

I have always used double plat or ngk laser iridium with no issues in my 2.5.

I ran stock plugs for a while and they got chewed up fast. On NGks now and even pushing 29 psi they keep the gap well.

I run the IS38 FBO and beat the crap out of my car and use stock heat-range Rutheniums.

I noticed a slight miss at while cruising between 67 and 70mph. I ran VCDS logs and found misfires on cylinders 3 and 4. Imagine my surprise when I pulled the plug for cylinder 3… no signs of any other damage and I have no idea how long it’s been like this. Never got a CEL.

I installed the new NGK Ruthenium HX plugs and so far everything has been great ????

Recently i changed my spark plugs DENSO IRIDIUM IK22 with NGK BKR7E gapped at 0.28inch-0,70mm. The car became very laggy, the throttle response got worse, much more turbo lag and major lost of power. Also im going back with the Densos.