Spark plug NGK or OEM FORD

OEM plugs are good but NGK iridiums are just as good and cheaper. If your car is stock, which if memory served correctly it is, then use NGK BKR8EIX.

I just bought my old APR S3+ '03 Jetta back. It's been running these for 12 years. I seem to be fine w/ my AEBs and my BKR7e plugs.

Im stage 2+ running a .028 if i run any larger of a gap I get these weird misfires under wide open throttle. Kinda feels like the clutch slipping but its not.

I've always used NGK in my hondas and never had any problems. They're OEM equipment on most (if not all) imports so I would recommend you just stick with what works.

As for the BKR7E's. It's proven that .028 gap is what you want with a stage 1 or 2 setup, and 0.032 for stock. No need to experiment. I've used these plugs on both factory coils and my current setup (OEM Bosch B7 2.0T coils) with no issues.

i put another set of bkr7e's but with 0.80mm gap, the car is running a lot better now.

I installed the BKR7E gapped to .028 with no issues. My vehicles seem to favor NGK more than Denso.

Another BKR7E user. Never had any problems with them.

I'm running PFR7Bs. I get a misfire or 3 here and there, only during low load low speed acceleration. I've got R8 coils too. Not sure if the RFD makes them occur any more frequently than they otherwise would, but I'm not worried about it.

Plugs I use Platinum plugs on my tuned 1.8t .I tried using bk7re's 3 or 4 times and each time the car ran like crap. I gapped at 028,tried 030 .The engine made less power up top every time by a difference of 2/3 psi.