Spark plug NGK or Denso

Got new NGK BKR8EIX pugs today and gapped them to 0.024". Originally, 0.030" according to my gauge. Very surprised when I removed the old plugs as they were all at varying degrees of tightness even though they were originally torqued to 25NM. Car runs great with the new plugs. No complaints so far.

I installed 2 remaining NGK that I had into cylinders 2, 4. Vehicle is running like new right now.

I had 2 spare, new spark plugs and these got rid of the misfires in cyls 2 and 4.

I ***always*** use NGK spark plugs after I tried a set of Champion plugs in my old GT380, and two of them failed after 1,500 miles. NGKs have never let me down in 35+ years of riding.

Just use NGK and put them in dry, never had a problem.

Checked spark plugs. The plug is an NGK BP6ES for those that might want to know. This is #4 plug, other 3 in similar condition. Would seem to indicate over fueling, or misfire condition across all 4 cylinders...

Most of my guys like to go with NGK plugs

That’s hilarious I just swapped the exact same plugs this morning in my Lotus, cheapies for iridium, what a difference.

Back in March two days after finishing the Water Pump replacement it started misfiring. I started with replacing the spark plugs with OEM Denso's, but that didn't fix it but was VERY NECESSARY.

I put in NGK PFR7S8EG plugs and man the car ran like absolute CRAP when it was cold. It ran fine, even great when it warmed up but it was so bad when cold that it was virtually un-driveable especially under moderate or hard throttle. I ended up putting the old plugs (Bosch platinum/iridium) back in because it was so bad.