Oil filter Mann or Bosch

Used some Rowe VW 508/509.00 0W20 oil plus Mann filter.

I use 10W/60 and change it out ever 5k. I also use MANN W 719/30 oil filters. They are designed for synthetic oils and longer oil changes.

Mann filter snapped firmly into place and felt really solidly built. Will be using this one from now on.

Can’t tighten these caps by hand as they need to be torqued down to spec. Also use OE Mann filters and gaskets as they will not leak.

Use a Mann oil filter and torque it properly... they shouldn't leak

I can recommend MANN filters. I've cut one open recently. They have a full metal construction, even the inner tube isn't plastic.

I recommend you use your favorite VW 502 00 spec motor oil with an OEM Mann oil filter and change them at 5K miles. My 2008 Rabbit with the 2.5 CBTA engine has 153K miles so far and I can barely hear it idle.

I've been using Castrol high mileage 5w-30 lately with Bosch oil filters. I suspect I don't actually have the one I wanted, just the Bosch model fits my V. I think their premium line is supposed to be similar to the Filtech design. I added the appropriate amount of Marvel Mystery Oil to the pan about 100 miles ago. I haven't been calculating mpg, but notice the b20 engine runs smoother.

I went with Valvoline 20w50 conventional oil and a MANN 719/5 filter.

The five has been known to not fill up with oil upon starting due to the one way valve At the top to create a bubble. It is rare but has happened. The five was always difficult to fill because you had to fill the small holes instead of the center.