Clutch kit Luk or Sachs

I’d recommend going with a reputable brand like LUK. If it’s a street car without any power adding modifications, just get a stock style organic clutch kit, like the Valeo kit from rock auto or FCP.

i did the LUK clutch kit and fly wheel, ppl on acurazine recommend to not use the throw out bearing from the kit and to get the OEM one, also oem rear main seal. that’s what i ended up doing and clutch is great 8k miles so far so good knock on wood.

I can say I still keep an original 1990 G60 Corrado Mannesman Sachs clutch kit around to compare to newer ZF Sachs clutch kits. The older ones are thicker metal for the pressure plate shell and its friction surface, the newer ZF Sachs is thinner metal, but I use them because we have no time machine to get NOS 1990s parts.

Just did the clutch on my old 3.0, rockauto had a Sachs clutch kit. Works well, is a pretty reputable OEM brand.

I’m in the middle of doing mine on my JK myself. I forget my mileage, under 100k. I wheel a little bit and plow my own driveway, so that may have contributed.

Like another commenter said, putting a new clutch in is easy. Getting access to it is a decently painful, though.

I got a Sachs clutch kit from RockAuto for about $200, the OEM one I pulled out said Sachs too, so I had some peace of mind that I’m at or near OEM quality for half the price (MOPAR parts were $500 from RockAuto). Kit comes with clutch, pressure plate, throw out bearing, and pilot bearing.

Throwout bearing on my 2000 TJ blew at 195k, but there was probably 50-80k left on the clutch plate. My last XJ was over 240k and had zero issues (different transmission but I believe the plates were similar).

You don't mention the year of your Wrangler, but my full LuK clutch kit was $135, got a cheap transmission jack from Harbor Freight for $80, had to order a new clutch fork clip for $2.50, that was it.

Put in a Sachs Xtend kit. I’m currently at 173k on my 13’ s5

Last month, I replaced the clutch kit and DMF on my 1999 PD115 Passat with a LuK kit, and it was also slipping in 4th and 5th when I floored it (stock tune). After about a week of casual driving, it bedded in, and I had no problems since.

Be aware that the "newer" Sachs kits have been a different manufacturer than FCC which makes the OEM clutch. Newer Sachs kit seems to be an exedy clutch and pressure plate.

I installed a 210mm clutch kit in my car and (I think) it doesn't work: I saw Black Forest Industries only sells the 210mm clutch for MkI's as an upgrade so I went on Rockauto and bought a Sachs 210mm clutch kit for an 84 1.8L Rabbit and a flywheel on Ebay