Brake pads OEM Toyota or OEM BMW

I have put 10k miles on it since then. The car has given me no issues whatsoever other than changing the brake pads and sensors.

Best things I did for my g80 was 1) Mishimoto skid plate to protect my oil cooler 2)Ceramic brake pads because the red dust that will engulf the lower half of your car after a 1/2 mile drive is insane.

My 2005 Prius needed brakes, I paid $7 for pads and $12 for each rotor. That's $31 for pads and rotors.

Just dropped 4500 on brakes (rotors, fluid, pads), tyres, and an oil change on my 2022 Toyota Supra for regular maintenance.

Camry or corolla hybrids. I have cameys in my fleet that have done half a million KMs needing nothing more than oil, filters, tyres and a single set of brake pads

Just did the brakes on my 1994 4runner. Discs were smooth, no rust or grooves. Way above spec, the pads must have been soft. I put in some much better quality pads and did not turn them.

And even the normal things they need are a little pricier than on normal cars; you might need ($300) brake pads and ($1,000) brake rotors in 50,000 or 60,000 miles instead of just ($250) brake pads.

Configuring new car I would definitelly go for ccbs. The braking power is massive. But if driving in cold weather, snow or cold rain and not touching the brake for couple of minutes on highway and the first braking after that is basically no braking.

If used incorrectly on the track you can fuck them up. Dont ask how I learned that. Swapping them to steelies now. Car is at 130k kms. The weight of ccbs is good but they starting peeling probably due to overheating them with too much worn brake pads.

Bought a 2012 Toyota Sequoia from Heritage Motors on Shore Drive with a fresh inspection on it, So I personally figured it'd be solid, as Sequoia's are known to be pretty dependable. Not only was it a lemon/some huge issues, but the brakes were slapped together with bubble gum and hopes and prayers. The brake pad on the passenger side was installed backwards, which I was shocked it didn't make noise on the test drive

It had about 35k miles on it and the service rep said it failed due to the front brakes being worn down to the rotors.