Brake pads Ferodo or Raybestos

I've had great results from Raybestos ST43s and Ferodo DS2500s for dual duty.

I'm using raybestos SP436ATRH for the pads and raybestos 96632FZN for the rotors. Been using them since January and have put about 6k on them, living in a really hilly area with my drums being basically useless because the shoes have been coated in gear oil due to an axle leak. I javent had any issues with brake fade or warping and I took them on a 2hr trip to west virginia from central ohio in March.

I replaced my rear pads with Raybestos EHT1761 at 23,000 miles. I did not replace the rotors as they were undamaged. I did buy rear rotors, Powerstop EBR1697EVC. I am at 37,000 now with no dust, no noise, and minimal pad wear.

On rockauto, Raybestos sells the element 3 rotor and brake and rotor kit. Basically all I use for my brake changes now. Great stopping power, and pads last a good while also. Highly recomend Raybestos element 3.

For aftermarket pads, Raybestos have had very good fitment and quality, I dig it. Their product line is called like "el3ment" or some such.

I’ve been using the pads for at least 15k miles on my 2015 evo, haven’t had any issues. Stops perfectly

Ferodo DS2500s were a popular autox/light track pad back in my Subaru days, they did well for me.

Previous discs and pads were OEM and the new ones are Ferodo. As mentioned previously, the sound was there with the OEM parts as well.

I track the car and use the DS2500 pads with DOT 4 brake guild. Let me tell you this from personal experience, the stock pads fade real quick. After 2 sessions or so (15mins sessions), the brakes get real spongy.

I hated Ferodo DS2500 on the street. Because they need to be warm to perform. And if I am driving on a highway for couple minutes or through a city, they loose the heat and perform badly for a bit.