Brake pads Ferodo or Raybestos

Have had very good experiences with Raybestos Element 3. Excellent price as well.

Ferodo DS2500 paired with Zimmerman blank rotors and Motul RBF600 is what I use. The tracks I go to are more technical and not fast so it's great for my use case. I imagine if I went to a track where speeds are above 150Km/H and have long, fast corners, I would need better pads. I'm considered intermediate to advanced and last ran a 1:47 at CTMP DDT with worn Vitour Tempesta Enzo tires. I think I can run low 40s this year. I would not track with stock pads. I overheated my pads and brake fade hit hard. The pads melted and I went off the track and almost over the hill at TMP (Cayuga).

I really liked my Raybestos pads

I used DS2500 for my first 2 track days but outgrew them rather quickly on a 2800 lb car. Last time I swapped to DS1.11 and felt much more confident braking deeper into corners with zero fade at my intermediate level. Now I just use DS2500 for the street and canyons.

I did the raybestos element 3 pads and coated rotors on my 2018 rogue and my wife’s Ford Escape. Very pleased and affordable on Rockauto

I bought raybestos ceramic pads and di it myself for $35. The new pads are quiet and have 30,000 miles on them with no significant wear and about 80% less dust.

I've bought Honda brakes for my 09 Accord several years ago, perfect fit and function. go with name brand, doesn't have to be top tier but OEM is a good starting point. I've just always gone with Raybestos for all my cars

i went with Raybestos Element, after reading they performed OK, and the price is fairly inexpensive. so far OK with minor issues. during installation, i shaved a hair off the pad material and the pad ears to get them to fit not as tightly. and after installation, the pad sometimes makes a click sound when changing direction of travel, or sudden acceleration after a complete stop. i think the pad is moving around in its mount and making a sound. did some searching and this might even happen with OEM to some people. i added more grease to the pad backing, noise went away for a few weeks, but later returned.

I use these pads (and rotors) on my FX35. A couple things I have noticed:

1). There have never been appropriate rattle clips included with any set of pads that I have ever purchased for this car…ever. I am still on OEM stuff at 180k miles. That isn’t just Raybestos. I even ordered Centric hardware…no dice. Not even close. Mind you, I always order model-specific hardware. No idea what the issue is, but it is clearly for the wrong car.

2). These pads take a few stops to heat up, which I kind of expected. I am satisfied with them on my daily, but the rotors are another matter entirely. They all warp within a month or two. That is odd considering they advertise the construction as Dura-Bar. That should be pretty resistant to that kind of thing. They definitely don’t hold up like Centrics do.

3). The shims have a nasty habit of falling off. Not while driving, but during service. You have one maybe two removals before they go MIA.

Other than that, I am not sure that I have noticed an issue with the pads being either wrong or out of tolerance. That is very not what I would expect from a brand like this.

First post in evo forum, looking for any advice on how to lower the noise from my raybestos ST-43 brake pads. I know that these are race pads, and I take the car to the track, but lately I've had to drive it to work as well. During city driving, when I brake from like 20mph, the screech is so loud its starting to become painful to my ears. I am trying my best now to just do sudden stops. They don't make much noise if I press the brake pedal firmly.