I would recommend first to switch fluid for Castrol SRF then switch to Ferodo DS1.11 brake pads exclusively for track use and DS2500 for daily/canyon carving.The beauty of Ferodo brake pads is that it not needed to re-bedding your pads when switching compounds as long as you stay within the Ferodo family.DS1.11 are endurance pads that love to operate in very high temperatures which might not require cooling ducts.
Ether Motul RBF 600 or Endless RF650 brake fluid is a good options. As far as pads go Ferodo DS2500 is a great pad for street/track. It has relatively low dust and noise levels compared to other track pads, yet still has moderately high bite and solid fade resistance of a track pad.
I had a 172,Clio with ferodo DS2500 pads all round and brembo high carbon vented front discs and solid rear discs.
I run the Ferodo DS2500 which would probably meet your criteria. Fair warning though - they make noise, especially in the fixed Brembo calipers. You have to regrease them every few months.
My Ford C-max hybrid has 113k miles on it. It's engine has around 80k miles on it. I change the oil like once a year. I've never touched the brakes because it barely uses them.
Buy Ferodo DS2500 brake pads then buy rotors according to your budget, forget about drilled rotors if anything go with slotted and if within your budget get two piece rotors in order to save unsprung weight.
Ferodo ds2500 is a great option. I’ve heard yellows are noisy/dusty. I’ve inhaled plumes of it first hand on the track.
Previous discs and pads were OEM and the new ones are Ferodo. As mentioned previously, the sound was there with the OEM parts as well.
I track the car and use the DS2500 pads with DOT 4 brake guild. Let me tell you this from personal experience, the stock pads fade real quick. After 2 sessions or so (15mins sessions), the brakes get real spongy.
Ford fusion, shitty undersized brakes for the car
Write your review
Help others - share your experience with this part.
