Brake pads Ferodo or Centric

I would like them from Ferodo as well. I have them on my BRZ and they are great.

Brake job coming up this weekend. New rotors (Centric blanks, OEM size) are still in transit to my door... but here's the good stuff. Ferodo DS2500 brake pads and RBS600.

I ran with Ferodo DS2500s. They work incredibly well for light track use (my street tires overheat before the brakes ever fade), they are dead silent, and, somehow, very low dust. They are more expensive than most other pads though and probably excessive for most people in their capabilities.

front - 9.4in vented rotors ferodo ds2500 fastroad pads rear - swapped to discs mk4 calipers ferodo ds2500 fastroad pads

overhauled the brakes(all 4 corners): -calipers(rebuild) -discs(brembo) -pads (ferodo ds2500)

The rear brake pads I use all the time are ferodo 2500, they are great for the track and don't make noise on the street.

I used Ferodo DS-2500 and Mintex Redbox on my 337, and that was my favorite brake setup of three VWs to date. Then there is my brother-in-law's 335i Sport My goal with the 337 was to delay ABS activation, as I thought that the rear was overbraked. I don't recall whether the new pad setup helped in that regard, but the DS-2500 improved the initial bite a lot.

I love me some blanks and Ferodo pads. But the pads aren't too budget friendly ($90 a set) and they've quite dirty, but the stopping power is awsome.

I got the upgrade, it's definitely noticeable from the stock 11.3 in the 1.8ts and vr6s - but really, if you want best stop for budget, just upgrade the rotors to slotted for heat dissapation and some good ferodo pads... but if you do upgrade, you'll notice difference in stopping - as well as your acceleration since you have more rotaional mass at that point...

Yeah use OEM rotors with DS2500 pads. That will be a great setup! Actually, DS2500 might be a bit too much for street, since they are pretty dusty and a little noisy.