Brake pads Ferodo or Bendix

I'm running OEM rotors and calipers with Ferodo DS2500 frt/Hawk HPS rear and ATE superblue fluid. The brakes held up great. But then coming out of Turn 2, I accelerate to about 90 before hitting the brakes again going on a steeper downhill to slow to about 30mph. This is where I feel a touch of fade.

I have had great success running the Ferodo DS2500 on the rear of the car.

If you adjust the regulator spring too tight, or you lower the car without releasing the additional tension that put on the regulator spring, the rear wheels will lock up. If you have it adjusted really close to the limit for your rear wheels (for optimum braking) and you upgrade the rear pads to Ferodo DS2500 and keep the Mintex Red Box pads on the front axle, you might also get rear wheel lockup because the total braking force at the rear wheels increases by 50% or so with that pad upgrade, and the front doesn't get a similar increase in grip.

The MKIV is definitley biased towards the rear. A grippy pad like Ferodo DS2500 up front helps a lot!

I have the Ferrodo ds2500 pads on the front of my car, they dust like crazy!!!!!! its okay though, who cares really? dust more than stock, but the dust seems easier, as far as i can remember to remove than stock. I have mintex red box in the rear....they suck. i second the squeeking on the rear brakes w/ the redbox. The only good thing about them is the price, and that the dust is little, and light colored. You will get plenty of milage out of your ds2500 pads. Mine are about 1/2 way worn, and i've put about 15k miles on them, and trust me i do not drive easy. i've had my rotors glow several times w/ them on, and regularly have to slow down from 80mph to stop lights and such. They wear like iron. when i first got them they squeeked like crazy, then once they got about 30% worn they shut up, now they are silent. They have less cold bite than stock, but not anything alittle more pedal pressure cant take care of. once they get warm/hot they start biting more and more and more....its awesome.

Bendix Titanium pads with new rotors 4/20/02

I put on new Brembo slotted rotors up front. Ferodo DS2000 fast road pads all around.

Kwok gave me a source to purchase and got me hooked on those DS2500's. They're still my pad of choice for the front brakes.

I liked my Ferodos, my bro tried the Ferodo DS 2000's and he gave them mixed reviews.

I put in some new rear brake pads today. The frist brakes I had were Autozone brand. Well, they went on fine on the driver side. On the passenger side It was near impossible to push the piston back far enough to get the pads on. I still needed about another 1/16th of an inch. I even bled brakes a little to make room for the piston compression. Still no luck. So I went back and bought some Bendix that were about 1/16th less in thickness. So, I put them on the passanger side. I had to wrestle with the piston again - that mofo would not budge. Finally I got it. So, I go for a drive with Albany brakes on one side and Bendix on the other. A horrible scaping erupts from the driver's side. The side that went on much easier. Visual inspection looked ok. So I took them off and they were all scraped to heck. Strange, as that was the easy side. So, I put the Bendix pads on that side and everything is fine.