Brake pads EBC or Textar

The rest (brake pads), I guess this is OEM but if you go to Sharjah and buy the parts yourself, I am confident you can get much lower prices, especially if you buy aftermarket such as Textar which is a OEM supplier.

If you are looking for high performance, I can vouch for EBC Yellowstuff and Bluestuff NDX. Yellowstuff is a good high performance street pad. no noise even in cold including down to -29 deg C. There is some squeal if the car has sat in the rain the first time you touch the brake pedal but its quiet after. the pads have really strong bite and sustain heat fairly well but wear down rather quickly if you are doing track days. mine lasted 20,000 kms including 6 track days and 4 autoX events. under road driving conditions only, they last much longer. If you want something to last longer and be better suited for track but still be streetable, Bluestuff NDX will do that. they have similar bite to Yellowstuff but sustain higher temperatures and last longer.

I like EBC greenstuff. No louder than stock, good cold bite, and a little better heat resistance. Good for autocross and street, but they won't hold up on the track. And they don't produce a huge amount of dust, though it is more than oem.

EBC Reds. I would check the rotors though, because if your pads are thin there’s a very good chance the rotors will need replacing too. In which case you may as well go Zimmerman rotors and EBC reds.

Closing the loop (sorry this is a bit long): the EBC Bluestuffs (eventually) performed super well for me at the HPDE this past weekend. I did have some noticeable shudder - but never any fade - develop after several laps during my Saturday morning sessions, but this went away as the brakes cooled and would not immediately be present at the begining of the following session, only reappearing once things got good and hot. I could not replicate it on the road during the Saturday lunch lull nor overnight. On Sunday the shudder was back only slightly during the morning's first session but by the second session had completely disappeared. After talking it through with several others that I trust, I'm content to chalk the shudder up to deposits on the rotors/not having changed nor prepped the rotors before installing the new pads. I'll not do it that way again. They definitely dust like crazy, but they were both responsive and predictible on track while being super well behaved on the street (so much so that I may just run them all the time). Even in my last session of the weekend, 17 laps of Summit Point main, I never had any doubt whatsoever about them performing for me heading into turn one. That sentence is about as good a review as I could give.

The 12.3 mk4/TT setup is great for my all other driving. Hell they were great even with my corrado and caddy trailer loaded (4,500+ lbs) on a 7,500+ lap around the USA.

I’ve had this exact set on a track day/daily driver…they will not fully bed in for like 300-500KM, trust me. After that, they feel like the hand of God stopping the car.

I upgraded to the yellows from stock pads and they held up fine but they were getting hot and I could smell them in my first session.

I tried them one time on my track car and they were terrible.

I hate EBC. People recommended their pads for dual duty track and daily. Lol they’re not good at all. Hawk, Ferodo, and Endless over EBC any day of the damn week.