Brake pads Brembo or Ferodo

I've used both I like the bite of the ferodo's better.

I got the brembo pads from autozone. They squealed a little for about 100 miles but are quite now. The car has some crazy stopping power, it is the S model.

I’ve ran the DS3.12... in my cayman. I get 15+ days on them... I like the harder bite from the Ferodos

Ferodo 2500 they are a (race pad) but work absolutely fine if you do daily driving I’ve had them for almost 6 months now and I’ve 4 track days along with daily driving and they have held up great

Ferodo ds 1.11 on my cayman GTS 4.0 seem to last a long time. 1 weekend at COTA which is very brake abusive plus another 3-4 weekends at a less brake intensive track. I drive them to/from the track and swap to ferodo ds2500 for street duty.

While my TR's Brembo's are great but it won't matter if other conditions aren't met.

Brembo is a performance brake company. The brakes can last a pretty long time. They don't wear down fast, and perform fantastic.

I switched to the Ferodo DSUno. I am satisfied with its performance, but they seem to struggle because of something. Today, after the track day on Saturday, I checked it and found a crack and a gnawed edge. Also, they have uneven wear, about 0.5-1mm difference. The differences are between the top and bottom parts of the pads, front and back parts and on different sides of the same rotor (inner and outer pads). Uneven wear was with the old pads as well. Recently, I installed brake air ducts, and after going out from the track, the temperature was, in the worst case, 480C degree, which looks fine for these pads. In total, I drove for about 3 hours on tracks, one on a wet track (so no hard braking) and two moderately/hard(8-9/10) braking. The brake rotors are also new, Zimmermann blank, installed with pads. The initial thickness of the pads is 16.4mm (with the plate, the plate is 5.5mm, so the "pure" pad is about 11mm) Currently, I have eaten about 4.5-5mm of the pads in 3 hours of tracking.

Bei ganz normalen Scheiben (ohne Schlitze und Löcher) wird es kaum einen Unterschied zwischen ATE und Brembo geben. Beim Thema Beläge ist definitiv Brembo besser. Brembo sind aber ehr Performance Beläge, zwar nicht auf Track Level, aber für die erhöhte Leistung ist halt auch mit höheren Verschleiß zu rechnen. Bei einem 0815 A nach B Auto reicht ATE völlig.

brake pad 300 go fly kite,perasan brembo...avoid this sc