Brake pads ATE or OEM Audi

If this is going to take off you need to make sure it will work for those with upgraded brakes, specifically the Audi 8 pot and 362mm ap discs setup.

I took the liberty of swapping my A4 brakes into S4 brakes, all for 600 dollars. The brakes should response much better, stronger, and use much less pedal force. Your brakes when the engine is off should be REALLY hard if properly bled.

Some new brakes, as the old ones are, well old & warped! ATE POwer disc's front & rear.

I used ATE pads, ECS Slotted Front Rotors/plain faced rears, and did a brake flush with ATE Type 200 fluid. Now that my brakes are good and bedded, I can tell there's a significant improvement especially in the rain.

The 337/TT brakes will put a huge smile on your face. Of course, you should also make sure you have hi perf tires as well, or they will overpower your tires. It's a very, very wise upgrade. Get them with HPS pads and SS lines.

I had it resurfaced and changed the pads to ATE ceramic pads. Now all my problem are solved.

Hi Black betty... here's the bottom line,.... if the S3 brakes can be purchased and fitted to your car within your budget, then buy the brakes. I've got S3 brakes on my Mk4 Gti, and beyond a dogbone mount, they're the best value mod possible. For performance road applications, the brakes are superb and miles beyond stock Gti brakes.

also, bang for the buck...a pair of used S4 brakes do the job for street driving that's what i'm running and it's marked improvement over the crappy stock brakes.

I found a nominal improvement in braking power and feel with the 12.3". But as NOVAdub stated, the biggest impact was on repeatability.

If you want an honest oppinion, do not run these brakes, just get yourself a corrado set up w/ good pads and you will be more than happy.