Brake discs EBC or OEM Volkswagen

I already have installed front 345mm rotors and calipers/carriers/shields/lines) from a 2008 R32/Passat V6 4-MO. So that works.

2008 Passat V6 4-MO front rotors, calipers, caliper brackets, and brakelines are plug and play. You get a factory BBK with 345mm rotors and calipers with a slightly bigger piston....as to not screw with the MC and brake balance too much.

I have a Canadian 2018 4motion Trendline, it came with 288mm front rotors.

EBC rotors (made in England) and Akebono pads (US). My mechanic thought that the rotors were OEM. Nice and thick and able to be cut once. Akebono pads are frequently OEM, quiet, long-lasting and dust free. Only coins this combo costs more than most.

Stock rotors are great, these brakes stock are very decent.

if you're going to take it back to the dealership, ask them to mount a different set of wheels and tires to eliminate that finally.

also, when was the last time your brake disks were replaced? it's not uncommon for brake dust to build up in the rotor and cause an imbalance. simply use compressed air or water to clean out the inside of the disk and see if it improves.

Yup. My front were grooved, rears were "diagnosed" as warped by VW techs. 12k miles. New pads and rotors has 7000 miles, haven't noticed anything yet.

I had my rotors replaced at 32345 miles with aftermarket brake pads back ordered. 2 months later bad vibration took back to,dealer bad rotors and pads feels good but now rears are squeaking lmao

Shaking issues happened around 20k. Replace the front rotors 526+ tax, and rear rotors need to be replaced soon (30k)... The quality of the OEM part is not good

Our rear rotors are garbage. The front seem fine but i can see rust marks for where my pads rest when i park it for the weekend. Im researching our incredibly limited options on rear rotors at the moment.