Owner reviews for brake pads

Stoptech + EBC reds is a pretty good option for street.

I always recommend the Raybestos Element3 EHT pads and rotors. We use them at work and have very little comebacks. Low noise, low dust, great pedal feel.

The e-Golf still uses the friction brakes to bring the car to a complete stop. Aggressive stopping also requires the friction brakes, which I do occasionally. Between those to, the brakes seem to avoid any significant rust build up.

Brakes and rotors are kinda easy.

Depending on the track the factory pads may be adequate for your first day, but a more aggressive and higher temp pad would be my recommendation because nothing will up the "pucker factor" like your brake pedal going to the floor. A pad like the Hawk HPS 5.0 is what I'd consider to be minimally acceptable for street tires on an average track. I'm a big fan of GLOC pads and I can confirm their R8 compound on all 4 corners works great on the GTI/R/A3/S3 for street tires.

i have a 2014 Camry with 120k miles and my brake pads still have 50% life, you still have a bunch of mikes left to drive if you don’t brake aggressively. i would get akebono brake pads and oem rotors unless you plan on taking the car to the track

At the shop I run, we use textar pads on Zimmerman rotors. For some reason textar on textar always make noise on BMWs ( we elevated our complaints all the way to Textar, and they sent a rep to finally shrug). Pagid pads are ok, but I find they wear out more quickly.

Replaced both brake pads with fresh new EBC Redstuff and ecstuning ss lines.

I replaced the original textar brake pads last fall with Akebono ceramic pads and things work fine. But with the good weather I have the window down and can hear a clicking sound only when braking. It’s not a CV joint click and it only clicks under braking load when the pads are warm.

I just switched from OEM (Brembo HH Sintered, I think) pads to Galfer HH Sintered pads. I forgot to scotchbrite the discs and I think I glazed everything up during bedding-in process. I used scotchbrite like mad on the discs and sanded the pads with 220 grit until they were dull like when new, but the brakes seem to have the same behavior - heavy brakes test after 10 mile bed-in ride, the brakes plateau without getting to ABS trigger unless I squeeze like a motherfucker. The previous pads I could stand up on the front wheel with one or two fingers, so I feel like I've done something wrong.