Owner reviews for brake pads

Paid £420 + £180 fitting for mine front and back on a 2019 Audi A4 by going via Euro Car Parts when the Audi garage quoted £1200!!

Had this on our Ford Kuga £860. Did it myself although I already have all the tools for £280 all round.

What bloody manufacturer is this? For my Volvo XC60 it’s around £330 for front discs and pads main dealer

If you are looking for high performance, I can vouch for EBC Yellowstuff and Bluestuff NDX. Yellowstuff is a good high performance street pad. no noise even in cold including down to -29 deg C. There is some squeal if the car has sat in the rain the first time you touch the brake pedal but its quiet after. the pads have really strong bite and sustain heat fairly well but wear down rather quickly if you are doing track days. mine lasted 20,000 kms including 6 track days and 4 autoX events. under road driving conditions only, they last much longer. If you want something to last longer and be better suited for track but still be streetable, Bluestuff NDX will do that. they have similar bite to Yellowstuff but sustain higher temperatures and last longer.

I autocross a bit and went with Hawk rotors and pads from Tirerack after a bit of mulling it over. Overall fairly happy with them, a little dusty but have NEVER faded while on them hard. Put maybe a hard 5k miles on them so far.

edit- I do have a 1.8 and as mentioned at least once you should consider getting the 1.8's calipers.

Z26 power stops with oem 1.8 brackets / calipers. They’re carbon ceramic brakes, they produce almost no brake dust, they don’t squeak at all and they brake REALLY good for street driving. ( get the power stops by rockauto as they’re way cheaper and you’ll get the better model for the price of the z23’s. Be sure to put in the 1994 year and not your 1.6 car so you get the bigger brakes Then get the calipers from treasure coast Miata ( they’ll be like 25$ each) . I just did that swap on my car and it’s phenomenal. ( I also got steel braided lines which makes the pedal feel so much better ). They fit perfect under my stock 14” daisys, the only thing I had to do was bend back the little brake dust guard on the rear brakes so they could clear it. ( because they’re made for 1.6’s. It takes about 10 minutes then you’re done )

All in all the brakes and calipers were about 500$ plus another 100$ for the steel braided lines which were definitely worth it. I’d just swap it all at once because your brake lines by now are expanded and unhappy.

Also I’d consider upgrading your cars brake fluid from the stock DOT 3 to DOT 4 which has a way higher heat tolerance and is good to drive on the streets. ( I recommend pentosin DOT 4 fluid which is what I run in my daily )

AKEBONO PRO-ACT ULTRA PREMIUM are available at Napa and I hear are some of the quietest brake pads you can get over the life span of the pad. They're ceramic pads which won't make your miata sound like a school bus

based on the inputs so far, I have decided to take the Sequoia (price: around $5000, he takes care of the brake pads and rotors.

I have the same problem with brembo pads but only when the brakes are cold.The car is breaking good and the noise only last a few minutes. So its ok for me.

I tried them on the track years ago. Junk!