Reviews of Luk flywheel

I bought a flywheel LUK off rockauto. It missed the qc also, one bolt hole lined up perfectly; out of 6.

I used an OEM LUK flywheel and upgraded to a 4-puck Sachs clutch.

Ahojte, riešim výmenu zotrvačníka na škoda superb 2017 a zaujimalo by ma, či niekto máte skúsenosť s dielami, ktoré sú z prvovýroby od značky Luk.

I read somewhere that some aftermarket flywheels (maybe Luk) were manufactured incorrectly and cause problems like the one you have now.

Imao sam isti problem. LUK nov zamajac... prolupao nakon mjesec dana.

I can answer that. i too upgraded my clutch in my 6R with a RSR kit from HS Tuning and even though my stock original flywheel was not too bad of a shape, i opted to have it replaced since i was putting everything else new. So i opted with the LUK version.

Luk is a solid brand. You can get a brand new Luk flywheel for $68 which is only a few bucks more than having your oem one turned. Probably worth it to have a nice clean perfect surface to mate the clutch to.

Put a clutch in a Jeep Wrangler. Luk kit and Luk flywheel from local Napa. Get it running, was setting misfire codes on 2 companion cylinders. Scoped it and had a bunch of noise on the crank sensor that matched where the ignition for the two missing cylinders triggered.

I bought an OEM Luk flywheel ($500) and OEM Luk clutch ($250) from eBay. And bolts, bushings, and other required bits for like $150. I brought it to my local Euro shop and they did everything for around ~$700, and that included changing the center support bearing, guibo, transmission mounts, shifter bushings, etc. This was on an E92 but I can't imagine an F30 being much different. Also yeah, you should change out the flywheel. Those generally fail before the clutch even does.

LUK invented the flywheel and the self adjusting clutch. Only gripe I had when I bought a LUK flywheel for my E46 despite looking identical to the original one it was 1kg heavier, it also had balancing weights with on whereas the original bmw one didn’t.