Now i can notice a smoother iddle and the car seems to pull more even in the RPM. So far so good i'll trust MObil 1 till my next oil change but always be aware of what those dealership are doing seems like a big ripp off to me !!!
Im running an Odyssey battery in my Corrado. Its new to me so I cant give long term feedback on the battery. But the battery doesnt have any lips on the bottom so it doesnt mount into the stock battery spot. Im still trying to figure out a way to mount it properly. Personally it cranked my car up faster then my old optima ever did. I like it and its got a 3 year warranty.
Remove one of the clamps holding the rack and as I recall, loosen the other one or perhaps remove it as well (been over 10 years since I last did it). Then pull the rack away from the firewall, loosen the jam nut and screw in the adjuster a little. Will probably take you a few times to get the feel of the adjustment.
I checked in ETKA to verify and all G60s (US) definitely all came with 3 bar FPRs. Also, they do list the Single pump Pierburg and VDO pumps with comments \"4 Bar\".
Try changing out the fuel filter, sounds like you have a lot of water in it. Wen the filter fills up with water, the engine pulls gas off the top (gas is lighter than water) and regularly gets a slug of water along with it which can cause a misfire at startup and on the road too.
I had the same problem with my Bridgestone Potenza RE050's. I contacted Bridgestone directly and they told me that they would warrranty my tires at a pro-rated cost. My tires had 20K on them and they met me halfway. I ended up with a brand new set of Bridgestone Potenza RE960A/S Pole Position's with UNI-T for $400 installed (Usually $800). I've had the tires for about 6 months and they are pretty quiet compared to the RE050's.
0w - 40 Mobile 1 was all I used for over 3 years, and the R was flawless until I sold her.
I have these on my GTI and they are super bright and sexy!
Yeah, I went with all new pads and rotors on all 4 corners. Bendix OEM replacements in the front and Duramax in the rears (I know I know...but I am poor ) I know some pads are better than others but beyond a certain point pads are pads are pads right?
they look like crap imo. too many gaps on the side, top, bottom etc... they just don't look like they belong. that and you have to bootleg the install just to hide everything. shouldn't have to be like that. keep it clean.
Write your review
Help others - share your experience with this part.
