Dodge parts reviews

Love them. My favorite tires that I’ve had on this car. Mine were summer tires though.

I fucking adore these tires. My wife runs them on her AWD R/T and I run them on my manual Challenger. They bite like a mofo in the rain and snow. A little mid on dry pavement but that’s ok for the trade off

I installed a Gates 33009S 195 degree after my Hughes install and haven’t had issues.

At 50k, my rotors and stock pads were shot. The brembo pads are very aggressive and eat the rotor quickly. If you are racing or spirited stopping often, they will go quick. I went with power stop replacements and I am very happy. No more rotor click and much less brake dust. I daily drive mine, so most of the miles are pretty easy. 2020 spwb charger.

I was skeptical, but I started using it and their best filter in my '98 Durango 5.9 (gas). I ran it for the full 25 K(+) and sent an oil sample out to a 3rd party "Analysts, Inc." for a full analysis - including spectrographic. Basically, their recommendation was that the oil showed minimal contamination, acceptable viscosity, and was still OK for continued use and to re-sample at next interval.

I currently have General G-Max AS-07 fitted on my Challenger. They are so far proving a good tire and handle the RWD and the car's weight well.

Ich bin ganz zufrieden mit den Crossclimate. Die erkaufen sich ihre lange Haltbarkeit und gute Performance bei Trockenheit aber mit Schwächen bei Nässe.

Ive had a set of 245/65/17's on the rear of my Dakota for about 4 to 5 years now. They are decent for a budget tire but don't expect them to be on par with the likes of Goodyear, BF, etc.. In my experience, there down fall is mileage. Mine have worn even and ride nice, dry traction is very good & wet traction can be questionable.

I did notice before I recently got safety/emission test for plate renewal, i wanted to confirm the I/M readiness had ran, that at idle, the full trims were extremely rich. I'm leaning towards the lower tstat having something to do with that. I have a 195 motorad(blah) that i had just installed before the plenum work. ECT didn't break 178 degrees on a highway cruise at 95+ degrees. That seems to be right at the threshold for the current dtc.

Had them installed and im quite underwhelmed. Sloppy paint work and having clips not even color matching is making me want to put my stock ones back on.