Spark plug Denso or BERU

Get the oem denso ones. There is nothing better than oem for that kind of thing.

This is what a 202k mile spark plug looks like on an 2013 Lexus gs350 daily driver. Pretty impressed with it overall. All 6 plugs look exactly like this.

For spark plugs, denso or bust

I've been running Denso (5346) IKH24 Iridium gapped .024 on APR stg1 for 48k miles and most recently on stg 2 with no issues.

Yup, these are great. Just be sure you gap them to APR's recommended gap of 0.024" ±0.002" or 0.6mm ±0.05mm. If you want 1 step colder plugs, not needed on your setup, but if you do for the future in Stage 2+. For 10$ more than the OEM NGK you can get the BERU.

Denso TT iridium are so far the best ones I’ve tried in terms of performance

if you want some good plugs, get some denso IKH24, they are 1 step cooler than stock plugs.. I change mine out every 20k miles..

IKH 24 plugs with stock coils work just fine. No cutout, rough idle or misfire.

Just an update for you and a PSA: CHECK YOUR SPARK PLUG GAP ON NEW PLUGS. I too trusted that the iridium plugs that I just bought should've been pre-gapped, but I noticed immediately after a tune-up my gas mileage went to piss. Popped the plugs back out and sure enough each one was well over 1mm .

The original dealership where I bought the van installed Denso spark plugs part # SXU22HCR11S which were supposed to have a gap of 0.044 but they all had either 0.039 or 0.040. Apparently no one checked the gap before putting them in.