Brake pads STOPTECH or OEM Porsche

It's honestly very low maitenence, the only thing that's slightly more costly than "normal" is your oil change due to the larger volume needed for these engines. Brakes are cheap of you do them yourself, not really different than other cars though. As far as reliability is concerned, it's top-notch.

Hey, I just did this. I'm not sure what your budget is, but these prices are pretty reasonable. You'll be paying less than you did for just the fronts, for all rotors and pads. brakeperformance dot com for rotors - blanks, slotted, cross drilled, dimple drilled, cross drilled and slotted, and dimple drilled and slotted. I snagged all 4 for about $200 -- Free shipping! Realistically, drilled rotors are a thing of the past, in terms of necessary...although, they do look fun! ha carpartkings dot com for pads - StopTech pads. I got front and back for $117, total. -- Free shipping! I have a GLI and I believe the part numbers differ from mine to yours, but they're close in price. If anything, yours may be cheaper. Pads arrived in 2 days. Rotors took around a week. Are you planning to do the work yourself, or are you just looking to buy parts and then pay someone for labor? If you're looking to do the work yourself, let me know. You'll need a few other (cheap) items - caliper grease, anti-squeal paste (some folks don't use it), m14 triple square bit, t30 torx bit, and a piston reset tool or c clamp or pliers. Piston tool can be rented from autozone or other auto parts store or you can find them online. I've never used one, but I hear tale it's easier. I was going to try to use it on mine, but have not.

I had StopTech brakes on an E92 M3, they were excellent, and I recommend them. Whether or not you need them is another question, and I would only offer that it seems to be a questionable undertaking, from a cost effectiveness perspective. If you need more stopping power for \"spirited street\" driving, the solution for that is easy, and free, slow down. As for your anticipated modest track use, good pads and fluid are all you need. I have 10 years of track experience with several cars, including M3, GT3 and ZO6. Although I have not tracked the Golf R, given its modest power level, and the effectiveness of the OE brakes, I am confident they will be fine for your needs, given proper pads and fluid. The real enemy of sustainable braking is heat. Putting much less money in front cooling ducts would probably help more than bigger brakes. With all that said, I agree that fixed calipers offer a design advantage, but probably one that is beyond any real benefit to 99% of folks on this forum. Finally, being able to change pads by simply popping them out the top of the caliper is cool, and obviously faster. But as for me, I'm not sure the time saved is worth the additional cost. After all, we aren't talking about pit stops in critical competition. So, spend your money as you wish, and have fun, but the bang-for-the-buck score on this one is pretty low.

I had both Wildwood and stoptech when working on my previous sti projects. You can't go wrong with either. I really loved stoptech for cost and easiness of changing pads out.

Adam's front slotted rotors, Stoptech Performance front pads.

For whatever it's worth, I had these on my B7 A4 and then S4...I had no issues with the brakes on the S4. Felt great and definitely an improvement. I definitely felt a difference when I had a full car of people and did a complete stop with everyone inside the car. Car just stopped.

I have always followed a similar technique that I found from StopTech but it's cool to see what is happening while doing it. And for anyone doing this, it takes a good long drive to cool down everything before you come to a complete stop. I didn't watch the whole thing but heard the guy touch on it briefly and that is if you have to come to a complete stop do not leave your foot on the brake pedal as you will surely leave a big blotch of pad material in that one spot and then you will get the "warped rotor" feeling as that bit of the rotor will be extra grabby.

When I upgraded my brakes I had to measure them myself and give the information to StopTech so they knew what I had.

Have your brakes been broken in properly? It could be that, I replaced the brakes on Face's car and they had the metal on metal sound for abit till they got fully broken in. The creaky type noise could be your wheel bearing.

I've already had my 3.2 TT at the track (same brakes) and after the 3rd session (out of 5) the brakes began to fade. Also by upgrading you would also get a weight saving although with these HUGE brakes prob the same (lol). Actually I still think even with these you'd save 20-30lbs for both corners.