Brake pads R1 Concepts or Ferodo

I just switched to R1 concepts Geomet pads, and drilled and slotted rotors. They're just as good as OEM from what I can tell.

Ferodo DS2500 is about the best pad you can get.

R1 concepts were an upgrade on my 2nd gen and got me through 4 years of abuse because the OEM ones would brake fade terribly. On my Camry they only lasted a year.

I've got OE spec ferodo on my 208 GTi no complaints from me, got brembo on my Saab 9-5 aero again all good I would avoid the cheaper end of the market

Ferodo DS2500 were good in my daily/tracked GTI and track NB Miata, until I got GLOC track pads on the latter. Which are awesome. BUT the DS2500 held up to the track really well, I'd definitely say for a daily that gets tracked they're about as good as you might get. Grease the contact points on the pad with copper or other compatible grease and i think they don't make much noise at all.

I put a set of r1 concepts pads and rotors on my wrx that I daily got them off Amazon for like $250 and came in like 2 days had them on for around 7500 miles and haven't had any issues.

I'm running Ferodo DS 1.11. and they're fine on the streets even during winters when it gets even as cold as -25C

Recently completed my HPDE and by the end of the day my stock pads were completely gone. Got my front rotors and all my pads replaced soon after that. I went for the Ferodo DS2500 pads. While bedding my pads, I noticed the brake feeling/bite is quite nice when braking at around 50-60% pressure, but once I tried emulating track style braking (i.e hitting brake pedal very hard) I noticed that my brake pedal was vibrating/rattling and also felt some sort of scraping was going on. This would happen even when hitting brakes hard from low speeds of ~30 mph. It's felt entirely on the front brakes. ABS did not engage, so I don't think the vibrations are from that. The obvious visible difference I see is the use of high temp brake lube from the shop.

Ferodo Ds2500 as brake pads or Ebc Yellostuff (a tad cheaper). Avoid drilled or grooved rotors because kinda useless. Just a good oem equivalent like Brembo (if in you market have CTF go for it)

I originally had r1 concepts rotors and pads but the pads started to squeak like crazy at slow speeds. Rotors were still good so I put on akebono pads and they are perfect.