Brake pads Project Mu or OEM Honda

Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.

Project MU HC+ pads. These have a higher operating temp range than Ferodo DS2500 and are perfectly streetable too. I get very minor squeal when coming to a stop if it's been a while since they were used hard. they also have great braking feel IMO, nice and sharp, and perfectly controllable. I use them on a Renault Megane RS 280 Cup, I've used them on track with semi-slicks (AD09s) and they held up great in 15 min sessions. Some minor vibration after the day but that fades away with use (or another hard besdding session). Do not recommend Ferodo DS2500 especially with semi slicks. Might be ok for your first day if you're slow, but you'll almost certainly cook them on your second and get deposits on your rotors. Great performance pads or the street though. On my car I only use them on the front, rears are stock.

I am easy on brakes. I coast to stops and don't speed either. I have a 2009 Fit. I swapped the front pads and rotors at 120,000 miles just because. They totally did not need to be swapped. I have since put 97,000 miles on the replacement pads and rotors. The ceramic pads I installed have plenty of life left. The rotors are near the end, but still work.

I put 68k on my 21 accord in about 2 years. Pads were all at 7mm. 80 percent highway, 20 percent city.

I did Project MU B force pads. DBA 4000 rotors, Stop tech stainless steel brake lines, Motul 660 brake fluid, radium brake booster brace(a must). Make sure to set those pads in the correct sequence and they gonna rip your face off bud! I had 6 piston brembos also, what a difference!

I do not recommend these for the street, however the track performance is off the charts.

They’re track/race pads, but I rarely track my car. It’s not a daily, just a fun weekend car, but I find the pad performance to be amazing and they’re not noisy like everyone says they would be.

PMU HC800+ was my dual duty pad and was a solid compromise. But end of the day it’s just that - a compromise

Seeing what looks like a Prelude wheel, why not just get the OEM honda brake pads? They are acceptable for most daily use, and the brake dust isn't to terrible to deal with

When I had my Honda, a freak incident occured involving pads. I was coming up to a red light and I just heard a "thunk" and next thing I know, I had little to no-brake power. Took the wheel and caliper off, and somehow the outer pad had completley vanished....no joke, gone, nothing left, not even a shred of metal.