Brake pads OEM Subaru or OEM Porsche

I own a 1999 996 C2. I have had the car for over 10 years. I bought it with 70k miles, and it now has 169,000 miles.

It is in the garage now waiting for front brakes. Have the parts, just got busy.

I'm not sure if it counts, but I put porsche brakes on the front and TTRS brakes on the rear.

I also supplied new rotors, pads, and all fluids and pads. My bill was $650 at a Porsche specific independent shop.

This is how a \u00a33.5k bill for Porsche brake pads and discs turned into a \u00a31.8k bill for me. Using the same OEM parts, but at a Porsche specialist not main dealer.

brakes on a cayman are pretty straight forward. DO NOT reuse the caliper mounting bolts they are one time use bolts. Also do yourself a favor and spend the money on factory brake pads and rotors.

It's not hard at all. One thing you want to watch out for is that Porsche is adamant about not reusing the bolts that hold on the caliper, so make sure you order a fresh set.

Most Porsche enthusiasts hate the Panamera eHybrids. I have had my 2015 for 3 years and absolutely love it. Best handling 4 door you will find. Regen brakes are squishy. I tool around time on all electric and then have fun other times.

I had an 2017 Outback 2.5, had it since April of 2017 until last week, during that time I put on 93k km on it. I wish I had gotten the 3.6, I got the 2.5 hoping to save fuel, my average was around 25mpg for lifetime, and I drive a lot on hwy and country road, I never once was able to hit the 30mpg even if it's just me in the car and driving 50mph on the country road, this part I really feel like Subaru should correct their mpg reading, in winter it can get as bad as 18mpg in the freezing weather, as when it's cold the transmission will make the engine constantly rev at higher to warm it up, the 2.5 is also not a smooth engine when at idle, I had a vibration issue that was deemed normal. Overall, it's a reliable car, but its not a durable car, another thing is, when taking off quickly from a stop, it can really bog down, most people are used to first gear and just boot, but these CVT don't have first gear and it can be rather unexpected, I've almost got hit from behind a couple times from that. The eyesight is a good feature, the lane departure can be annoying at times but I was ok with it, these cars have an issue with windshield chipping, and if the car has eyesight, the windshield need to be a specific one and then the eyesight needs to be re-calibrated, this happened to me TWICE, and it got expensive very quick. OEM tires are lousy, by lousy I mean it doesn't even get good mpg, doesn't get good grip in ANY condition and puncture easily if you take it to any sort of gravel road, I had puncture the tire within 1200km, I just got some decent A/T tires after, no problem for the last 90k. The brakes are soft, so first thing I did was changed the pads.

I have an old groupe A Subaru homologation car. It’s on its 6th engine which is also currently blown. There are NO MORE ENGINES. NONE. ZERO. NADA. NOTHING. So now I have to buy a crashed wrx and swap the whole drivetrain over if I want the car to move under its own power. My frs just……… I mean…… 250 in brake pads and fluid, and 500 bucks in tires. Oh and a 90$ oil change before and after.

How were the brakes? My concern with towing is the brakes. I have not towed anything mainly for this reason. I find the brakes to be a weak point of the car and the rear pads wear out very quickly, on the 2013 version anyway. I am not a heavy footed driver, no fast starts, no slamming of brakes at lights and stop signs. Keep things nice and smooth, no riding of brakes, no fast corners which would engage the rear brakes more due to the vector control system (whatever they call it). Rear brakes wear fast and overall braking is fair. Your thoughts from a trailer perspective? Thx!!!