Brake pads Hella Pagid or JURID

Pagid Yellows (also branded as RS29) is what I have on my 987.2 track car. If you want a track only pad, I’ve had great experience with PFC08, but I’ve used that on my BMW128i track car, so take that into consideration. Both can be used to/from track driving too. Just be prepped for a lot of squeal. Both are dusty as they should so be aware of that as well.

I run Pagid yellows, and yeah, they love to squeal when they're cold. Cold, as in, like you said, not at track driving operating temperature. Occasional street driving is loud, but I don't concern myself with that.

Not only is the yellow pad performance better at the track, but they are Pagid's "endurance" pad, so, at least compared to stock, they last a good deal longer too. Performance and durability are easily worth a little noise to me.

Good braking, squeak free, low dust. The OE pads are great. They have good initial bite, no noise, high quality but they are semi-metallic so they make a bunch of dust. There are ceramic pad options that are low dust but they can be squeaky and won’t perform that great until they are warmed up. And of course you can get bargain bin organic pads which will have low dust but won’t perform nearly as well as stock. It’s a trade off no matter what. I went with the OE Jurid pads. I’d rather clean my wheels than lose braking performance or deal with noise. Also keep in mind that the rotors matter with noise and dust too.

I'm running the JURID pads, too, and I'm at a little over 13k miles. No issues whatsoever...

I put ~$120 worth of good Pagid pads on my 525i and had ZERO regrets. Especially for being freakin' $880 cheaper than the dealership! Brake pads take all of ten minutes to DIY, no reason to spend that much.

I can tell the pads are fairly recent and are Jurid brand so I know they've been replaced recently.

You will need good 9.4" vented rotors & good pads like Ferodo, Pagid or Jurid.

Jurid,like Pagid and ATE,and Lucas/Girling are all OEM suppliers to VW,the Jurid pads are a OEM replacement and make a hell of a lot of dust,but are less likely to "squeek" due to their softer compound.

When I picked her up, I was told my front and rear brake pads are all down 1mm already. At this rate I’ll likely need to replace them around 15k. I thought this made sense for the front pads since they’re the JURID high performance ones, but the rears being worn that much seemed strange. I don’t drive fast/brake hard/etc, never track, or do anything otherwise that should wear my brakes prematurely.

Jurid = stock BMW E36M3 pads, pretty good on the street, not to good on the track. DOn't know if there are different types