Brake pads Ferodo or Zimmermann

I've got OE spec ferodo on my 208 GTi no complaints from me, got brembo on my Saab 9-5 aero again all good I would avoid the cheaper end of the market

Ferodo DS2500 were good in my daily/tracked GTI and track NB Miata, until I got GLOC track pads on the latter. Which are awesome. BUT the DS2500 held up to the track really well, I'd definitely say for a daily that gets tracked they're about as good as you might get. Grease the contact points on the pad with copper or other compatible grease and i think they don't make much noise at all.

I'm running Ferodo DS 1.11. and they're fine on the streets even during winters when it gets even as cold as -25C

I got their vented rear and front rotors (Girodiscs) with stock calipers and Ferrodo DS2500 pads all around. For a stock powered car they work great at VIR. I have done 2 sessions there now and braking is pretty decent. On the street this combo will never fade period. The rears overheat which overload the fronts and cause issues. Rears overheating also causes the wheel bearings to go out so getting vented rears is just smart.

Ferodo DS2500 are a classic high performance street pad, every time I go through a set I am sure something better must have come along and do some market research, always end up back on the DS2500´s as an everday/occasional track pad. They are cheap and they last forever (really) relative to punishment taken, they are dusty though, that´s really my main issue with them.

If you can't find ceramic pads, get Ferodo Premium Eco Friction.

I’ve been using the pads for at least 15k miles on my 2015 evo, haven’t had any issues. Stops perfectly

DS2500s on my daily. Bit of squeak, but it’s not bad at all. I have EBC yellow on the rear as they don’t make DS2500s for a non PP mk7.5, and they’re garbage.

Previous discs and pads were OEM and the new ones are Ferodo. As mentioned previously, the sound was there with the OEM parts as well.

My rear pads cracked after 3 months, 4k km of use.