Brake pads Ferodo or Zimmermann

The pad material composite can be upgraded to extend mileage adding replacement parts like Bosch or Zimmermann (OEM suppliers) that are the same or better than stock.

Ferodo DS2500 paired with Zimmerman blank rotors and Motul RBF600 is what I use. The tracks I go to are more technical and not fast so it's great for my use case. I imagine if I went to a track where speeds are above 150Km/H and have long, fast corners, I would need better pads. I'm considered intermediate to advanced and last ran a 1:47 at CTMP DDT with worn Vitour Tempesta Enzo tires. I think I can run low 40s this year. I would not track with stock pads. I overheated my pads and brake fade hit hard. The pads melted and I went off the track and almost over the hill at TMP (Cayuga).

I used DS2500 for my first 2 track days but outgrew them rather quickly on a 2800 lb car. Last time I swapped to DS1.11 and felt much more confident braking deeper into corners with zero fade at my intermediate level. Now I just use DS2500 for the street and canyons.

if you want raw stopping power then Ferodo DS2500's are great.

I was a huge fan of Ferodo DS2500s on Centric rotors. They performed insanely well for street duty and were decent enough for track days.

I did them 6 months ago. I used import direct rotors from o Reilly. and some brake pads from NAPA I think I used Zimmerman brake pads. I have 0 problems with them and only need to do my rears in a couple of months according to the wear sensor.

Ferodo DS2500 is about the best pad you can get.

Ferodo Ds2500 as brake pads or Ebc Yellostuff (a tad cheaper). Avoid drilled or grooved rotors because kinda useless. Just a good oem equivalent like Brembo (if in you market have CTF go for it)

i’ve ran ferrodo ds2500 on my gli, they worked well as a hybrid street/track pad but would fade a bit after a few hard sessions

I hated Ferodo DS2500 on the street. Because they need to be warm to perform. And if I am driving on a highway for couple minutes or through a city, they loose the heat and perform badly for a bit.