Brake pads Ferodo or OEM Nissan

If you can't find ceramic pads, get Ferodo Premium Eco Friction.

I’ve been using the pads for at least 15k miles on my 2015 evo, haven’t had any issues. Stops perfectly

Ferodo DS2500s were a popular autox/light track pad back in my Subaru days, they did well for me.

Been using these brake pads and shoes in my cars for the last 20 years with no issues

Very happy with the setup. I’ve failed to get it to fade on either mountain roads or the track, but never done long stints, maybe 20 min max. The DS2500s are nice because you can swap them out for other more or less aggressive Ferodo compounds without issue.

I ran Hawk pads on cars in the past and hated them, can’t say enough good things about the Ferodos.

with only time and not use, it should be okay. think of it like putting new brake pads but with rotors that are still within service spec.

I would recommend first to switch fluid for Castrol SRF then switch to Ferodo DS1.11 brake pads exclusively for track use and DS2500 for daily/canyon carving.The beauty of Ferodo brake pads is that it not needed to re-bedding your pads when switching compounds as long as you stay within the Ferodo family.DS1.11 are endurance pads that love to operate in very high temperatures which might not require cooling ducts.

Recently completed my HPDE and by the end of the day my stock pads were completely gone. Got my front rotors and all my pads replaced soon after that. I went for the Ferodo DS2500 pads. While bedding my pads, I noticed the brake feeling/bite is quite nice when braking at around 50-60% pressure, but once I tried emulating track style braking (i.e hitting brake pedal very hard) I noticed that my brake pedal was vibrating/rattling and also felt some sort of scraping was going on. This would happen even when hitting brakes hard from low speeds of ~30 mph. It's felt entirely on the front brakes. ABS did not engage, so I don't think the vibrations are from that. The obvious visible difference I see is the use of high temp brake lube from the shop.

Ferodo Ds2500 as brake pads or Ebc Yellostuff (a tad cheaper). Avoid drilled or grooved rotors because kinda useless. Just a good oem equivalent like Brembo (if in you market have CTF go for it)

I hated Ferodo DS2500 on the street. Because they need to be warm to perform. And if I am driving on a highway for couple minutes or through a city, they loose the heat and perform badly for a bit.