Brake pads Ferodo or OEM Honda

I had a 172,Clio with ferodo DS2500 pads all round and brembo high carbon vented front discs and solid rear discs.

I run the Ferodo DS2500 which would probably meet your criteria. Fair warning though - they make noise, especially in the fixed Brembo calipers. You have to regrease them every few months.

Buy Ferodo DS2500 brake pads then buy rotors according to your budget, forget about drilled rotors if anything go with slotted and if within your budget get two piece rotors in order to save unsprung weight.

I am easy on brakes. I coast to stops and don't speed either. I have a 2009 Fit. I swapped the front pads and rotors at 120,000 miles just because. They totally did not need to be swapped. I have since put 97,000 miles on the replacement pads and rotors. The ceramic pads I installed have plenty of life left. The rotors are near the end, but still work.

I put 68k on my 21 accord in about 2 years. Pads were all at 7mm. 80 percent highway, 20 percent city.

Ferodo ds2500 is a great option. I’ve heard yellows are noisy/dusty. I’ve inhaled plumes of it first hand on the track.

Stock PP1 pads are Ferodo DS2500. Actually pretty good.

Previous discs and pads were OEM and the new ones are Ferodo. As mentioned previously, the sound was there with the OEM parts as well.

I track the car and use the DS2500 pads with DOT 4 brake guild. Let me tell you this from personal experience, the stock pads fade real quick. After 2 sessions or so (15mins sessions), the brakes get real spongy.

my 08 Accord went through rear pads every 18-20K miles. They were way too soft.