Brake pads Ferodo or OEM Honda

All 10th gen civics do this.. 10th gen accord, and we've noticed it on some 11th gen civics, too... There was an updated pad that's supposed to help with it..

I’ve been using the pads for at least 15k miles on my 2015 evo, haven’t had any issues. Stops perfectly

Ferodo DS2500s were a popular autox/light track pad back in my Subaru days, they did well for me.

Been using these brake pads and shoes in my cars for the last 20 years with no issues

Very happy with the setup. I’ve failed to get it to fade on either mountain roads or the track, but never done long stints, maybe 20 min max. The DS2500s are nice because you can swap them out for other more or less aggressive Ferodo compounds without issue.

I ran Hawk pads on cars in the past and hated them, can’t say enough good things about the Ferodos.

I would recommend first to switch fluid for Castrol SRF then switch to Ferodo DS1.11 brake pads exclusively for track use and DS2500 for daily/canyon carving.The beauty of Ferodo brake pads is that it not needed to re-bedding your pads when switching compounds as long as you stay within the Ferodo family.DS1.11 are endurance pads that love to operate in very high temperatures which might not require cooling ducts.

Ether Motul RBF 600 or Endless RF650 brake fluid is a good options. As far as pads go Ferodo DS2500 is a great pad for street/track. It has relatively low dust and noise levels compared to other track pads, yet still has moderately high bite and solid fade resistance of a track pad.

DS2500s on my daily. Bit of squeak, but it’s not bad at all. I have EBC yellow on the rear as they don’t make DS2500s for a non PP mk7.5, and they’re garbage.

I had rears replaced at 40k. At 60k now. I’ve always had a rumbling sound and vibration when breaking from 60-55 mph (around 57) since 40k.

I put some Ferodo DS2500s for a HPDE event at the end of July and noticed discoloration and crumbling on the edges. Swapped them out with PFC08s for this weekend’s HPDE and noticed chunks of material missing from the inner of the pad.