Brake pads Ferodo or OEM BMW

I typically run RBF600 with Ferodo DS2500, changed at the beginning of spring and after each HPDE (back to OEM brake fluid in the winter). Massive improvement over the stock for sure, but at the end of a 2 day track weekend the pedal will be on the softer side, which improves after brake flush.

I have had good success with Ferodo DS2500 pads front and rear, OEM rotors, and RBF600 (or equivalent) brake fluid. The Ferodo pads were fine to use for the street (no noise, normal dust, and seem reasonably rotor friendly) and competent on the track.

M3 stock brakes are better, the GTI gets a little tail-happy under hard braking above 110-130mph.

Seems like there would be room in the market for a slightly detuned S55 base model without the fancy seats, brakes and wheels for about $5-8k less like the M3/M4: M3/M4 Competition.

Ds2500 are at least oem dust level from what I've heard but better performance and they do squeak a bit.

I really love driving it though, particularly the brakes and the handling.

Replaced my pads and rotors about a year ago. Went with some steel slotted rotors and Ferodo DS2500 pads, for a total of probably less than $1000 all around. The Ferodo pads are much more linear/progressive in feel, whereas in my opinion the OEM pads had way too much initial bite and were too grabby, which is less than ideal when you're trying to be smooth. Additionally, the ferodo pads hold out far longer on the track before fading, while still handling adequately for daily driving (including in the winter).

I'm using Ferodo DS2500. Good pad for both road and track duty.

My local Bavarian car specialist refuses to install ceramic pads and will only do OEM due to low performance in the cold and increased wear on rotors. I was looking forward to less brake dust, especially on the front, but I live on top of one of the steepest hills in the city. I now have OEM pads.

Brake Pads Toast? After 2 Track Days. Ferodo DS2500 - 2008 Porsche Cayman S